This Miele Turbo Comfort STB 205-3 Turbobrush is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its turbine to the brush roll. This Turbobrush has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 series canister vacuums.
The Miele STB 205-3 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush. Improve the cleaning performance on carpets by purchasing this Turbobrush with the Miele Galaxy vacuum shown above.
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip along the front and squeege along the back pop out to provide soft, non-scratching cleaning action. Notches along the front of the brush allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip and squeege are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. A soft, non-scratching roller under the elbow bears any downward pressure, enabling the nozzle to glide gently over the floor. Add this nozzle to the Miele vacuum shown above to enable cleanng of carpets and rugs.
The brushing action by the turbine driven revolving brush roll provides deeper cleaning of your upholstered furniture and carpeted stairs. This hand attachment is a great addition for the Miele canister above. It also works well for cleaning cars, trucks and recreational vehicles.
This 20" Miele Stainless Steel Wand will look and work well for years to come even in high humitity areas. The large latch release pad near its top makes it easy to remove from the hose or wand while the square hole near its bottom permits additional wands or floor nozzles to latch firmly in place. This wand works well for extending your reach of a Miele U1 or S7 upright vacuum when attached to your existing wand. This wand is slightly over 20" long, making it great as an extension wand for the Miele vacuum shown above to reach higher areas.
This steel 5 3/4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
Genuine Miele 3D AirClean Bags & Filters Type FJM to keep your Miele performing well with improved air flow. The box contains 4 White AirClean FilterBags with Red Mounting Collar, 1 Electrostatic Pre-motor Filter and 1 Super Air Clean exhaust filter. These bags are for use in Miele S250, S300, S500, S4000, S6000 and Compact C2 series canisters and power teams. These Miele 3D AirClean 3D bags are an improved version of the former Miele bags #05588921 and #09338520. Include additional dustbags when ordering the Miele midsize canister shown above and receive free shipping on them as well.
This Genuine Miele Certified HEPA Exhaust Filter #SF-AH 50 combines a Certified HEPA Filter with a thin layer of Activated Charcoal to provide simultaneous HEPA filtration and trapping of unpleasant odors. By meeting the stringent "HEPA 12" specification, it is ideal for allergy and asthma sufferers. This filter should be replaced every 12 months with typical household use.
Since Miele has replaced this filter with an improved one, please see our list Current Miele Filters. One HEPA filter is installed in the Miele Luna Galaxy vacuum shown above.
The Miele Luna Galaxy vacuum's completely sealed system, when equipped with a Certified HEPA Filter like this, will retain 99.97% of pollens, household dust, dust mite droppings and other allergens as small as 0.3 µm in size. This is highly recommended for those who have dust related allergies or asthma.
This optional exhaust filter combines a thick layer of Activated Charcoal and two electrostatic filters to provide heavy duty trapping of unpleasant odors. This is recommended of pet owners who desire better odor control.
Since Miele has replaced this filter with an improved one, please see our list Current Miele Filters. The completely sealed system in the Miele Galaxy Series vacuum, when equipped with this optional exhaust filter, will provide outstanding filtration plus excellant odor control. This filter fits in the same place as the Certified HEPA Filter shown above. You can not use both filters at the same time.
Known as SF-SAC20 and SF-SAC 30, this package contains three electrostatic Super Air Clean Filters. These are designed for those desiring outstanding filtration but who do not have dust related sensitivities which require the level of filtration that meets the stringent HEPA specification.
When purchasing a box of Miele paper bags, you will also received one of these filters plus the electrostatic pre-motor filter packaged with them. You will need the filter holder shown below to use these filters in a Miele Luna since they are used instead of the HEPA filter.
This Exhaust Filter Holder #05986973 for the Miele S4, S5, S6 and Compact C1 & C2 series canister vacuums is used to hold the flat Super Air Clean filter when a HEPA exhaust filter is not being used. This is a holder, not a filter. A Super Air Clean exhaust filter is included in every box of Miele Type G,N and Type F,J,M bags. This filter holder fits all Miele S4000, S5000, S6000 series canister vacuums. This holder was previously known as #05986971.
For a similar product for use in the Miele S8 and C3 series vacuums, see the Exhaust Filter Holder #07782945. Purchase this filter holder if you plan to use the Super Air Clean filters in the Miele Luna in the future instead of a HEPA exhaust filter.