Hoover Filters

This genuine Hoover HEPA Cartridge Filter fits inside the Twin Chamber® Dirt Container on all Hoover Bagless uprights. It consists of a cylinder shaped cartridge with fanfold filter media between the black vinyl ends. This long life filter has a coating similar to teflon which makes it very easy to clean. It can even be washed by holding it under running water. Hoover recommends replacing this filter every three to six months. This filter package #40140201 contains one "Type 201" filter #42611049. It was previously known as filter #43611042.

This fanfold design provides a large filter media area for reduced resistance to air flow while producing a very high level of filtration which meets the stringent HEPA specification.   View Larger Image

This HEPA Exhaust Filter fits in a door on the side of the Hoover Windtunnel upright vacuums. It consists of fanfold filter media in a white plastic cartridge. The cartridge measures 10 15/16" x 3 3/8" x 1/2". A seal around its edge ensures that the air passes through it, not around it like the Genuine Hoover version. This design provides a large filter media area for reduced resistance to air flow while producing a high level of filtration which meets the stringent HEPA specification for the air that passes through it.

This WindTunnel Bagless Secondary Filter fits below the Twin Chamber® Dirt Container. It is visable throught the hole in its cover plate. The filter measures 5 5/8" x 2 1/2" x 1/4" with rounded ends. There is a 3/8" hole in the center through which the cover plate screw passes. While the earlier filters were green as shown, Hoover's later ones are white.

This package #40110004 contains two Upright Exhaust Filters #38766009. Each filter fits inside a door on the side of the Standard Bagless uprights and many Non-Self-Propelled WindTunnel uprights. Each filter measures 6 5/8" x 3 5/16" x 1/2".