Generic Central

Generic Central

Availability:

30' Quilted Hose Sock for Central Vacuum Hose
This thick, grey quilted hose sock provides a soft, gentle surface for your central vacuum hose to protect your furniture and walls. A full length zipper makes it easy to install on your hose. This is made to fit all 30' central vacuum hoses. Color and pattern may vary from the one shown here.
Ristenbatt Price: $54.95
Code: 7650961135


45 Elbow #2008-1
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short pipe between them to form a 90° bend in the system.

If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.   View Larger Image
Ristenbatt Price: $1.75
Code: 2008-1     Mfg. Code: SV8056


45 Short Spigot #765518W
This white 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with a 45° Double Wye #752145 where two in-line branches join with a main pipe line at a 90° angle.

If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc.   View Larger Image
Ristenbatt Price: $1.75
Code: 2009-1     Mfg. Code: 765518W


90 Short Elbow #765506W
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object which is able to get through this short elbow should also pass through the others easily.

If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate.   View Larger Image
Ristenbatt Price: $1.75
Code: 2004-1     Mfg. Code: 765506W


Box of 100' Central Vac Pipe #P100
This box contains twenty 5' long 2" Thin Wall PVC Central Vacuum Pipes. While these white pipes are not made by Hayden, they mate perfectly with the various Hayden inlets, elbows, etc. listed on our site.

Due to the high minimum shipping charges for such long packages, we can not split these boxes into smaller quantities and still have the PVC pipes qualify for free shipping.
Ristenbatt Price: $99.95
Free Shipping via UPS Ground.  Shipping Info
Code: P100


Central Vacuum Exhaust Muffler #765500W
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.

This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.   View Larger Image
Ristenbatt Price: $19.95
Code: 2020-14     Mfg. Code: 765500W


Central Vacuum Hayden Exhaust Vent Cap #793030W
This white Hayden Exhaust Vent Cap mounts on the outside of your house where the central vacuum exhausts the air. It has a 2 1/2" square flap which blows open when the vacuum runs and closes automatically when not running. Two screw holes on 3 5/8" centers enable you to secure it to the wall.

The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe.   View Larger Image
Ristenbatt Price: $6.95
Code: 3030-1     Mfg. Code: 793030W


Central Vacuum Hayden Motor Muffler #2029-28
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.

This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
Ristenbatt Price: $19.95
Code: 2029-28     Mfg. Code: 2029-28


Hayden Cog Power Nozzle Belt #4193-00
This reinforced belt fits the Hayden power nozzles that use a cog type belt. This design provides positive power transfer from the motor to the brush roll. It can not stretch and slip. We sell this belt individually since they typically will last three to five or more years.   View Larger Image
Ristenbatt Price: $9.95
Code: 4193-00


Hayden 38 Short Elbow #2038-1
This white Hayden 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.

If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.   View Larger Image
Ristenbatt Price: $1.75
Code: 2038-1     Mfg. Code: 752038



Ristenbatt Vacuum
Accepts Credit Cards



ABOUT SSL CERTIFICATES
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Honored Member of the Vacuum Dealers Trade Association
VDTA Member