Central Vacuum Pipe Coupler #765529W
Code: 2010-1
    Mfg. Code: 765529W
Central Vacuum Pipe Mounting Strap #752017
Code: 2017-1
    Mfg. Code: 752017
Central Vacuum Slip Pipe Coupler #765528W
Code: 765528W
    Mfg. Code: 765528W
Central Vacuum Pipe Trim Collar #752031
Code: 2031-1
    Mfg. Code: 752031
Central 38 Short Elbow #2038-1
Code: 2038-1
    Mfg. Code: 752038
Central 45 Elbow #2008-1
Code: 2008-1
    Mfg. Code: SV8056
Central 45 Short Spigot #765518W
Code: 2009-1
    Mfg. Code: 765518W
Central 90 Short Elbow #765506W
Code: 2004-1
    Mfg. Code: 765506W
Central 90 Short Spigot #2021-1
Code: 2021-1
    Mfg. Code: 752021
Central 90 Sweep Elbow
Code: 2001-1
    Mfg. Code: 765510W
This white Central Vacuum Pipe Coupler is designed to couple two 2" OD central vacuum pipes together. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$0.65
Visit Store
This white Central Vacuum Pipe Mounting Strap is designed to secure 2" OD central vacuum piping to the floor joists, walls, etc. It wraps around the pipe and has two flanges with screw holes for securing it.
View Larger Image
Ristenbatt Price:
$0.65
Visit Store
This white Central Vacuum Slip Pipe Coupler is designed to couple two 2" OD central vacuum pipes together. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. This coupler is great for pipe repairs since it does not have a stop ridge in the center, enabling you to slide it on a pipe where separating the two pipe segments is not possible.
View Larger Image
Ristenbatt Price:
$0.95
Visit Store
This white Central Vacuum Pipe Trim Collar is designed to cover the rough hole around a 2" OD central vacuum pipe. This is typically used on the floor and ceiling of a closet which has a pipe passing through it. The outside diameter of this trim collar is 3 1/2".
View Larger Image
Ristenbatt Price:
$1.50
Visit Store
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short pipe between them to form a 90° bend in the system.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with a 45° Double Wye #752145 where two in-line branches join with a main pipe line at a 90° angle.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. View Larger Image
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object which is able to get through this short elbow should also pass through the others easily.
If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate. View Larger Image
If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.
Ristenbatt Price:
$1.75
Visit Store
This white 90° Sweep Elbow is designed to couple two pipes at a corner in a central vacuum pipe system. If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store