Vacuum Accessories

This generic 35mm Floor Brush will fit the Hoover Duro and Maytag canisters in their S3590 series. It is 14" wide and 2.5" deep, having nylon brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle.   View Larger Image

This SFS 10 Extension Hose stretches to enable you to reach 5 feet further with your Miele non-electric hose. It is used by removing your hose's curved handle, attaching the SFS 10 to your hose and then attaching the removed curved handle to the end of the extension hose. When not being used the silver hose collapses into the semi-rigid dark gray jacket and snaps closed. A short section of the silver stretch hose is visible in the photo since it is not completely closed. This extension hose is also known by part #07252210.

The SFS 10 Extension Hose mates with Miele non-electric hoses which have two tabs near the curved hose handle which can be easily depressed with your thumb and finger to removal the handle.   View Larger Image

This deluxe genuine Sanitaire/Eureka European style floor brush is 12" wide and 2.5" deep, having nylon brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle.   View Larger Image

This standard hose is for Miele S6000 (S6) and Compact C2 series vacuums which are not used with a powerbrush. The hose has the connector at the vacuum attached but not the curved hose handle that snaps onto it. This hose replaced #07461612 and #07461614.