Vacuum Accessories

Electric Hose with direct connect ends at wand and a short cord at the vacuum that is plugged into the vacuum. A fingertip switch on the deluxe handle enables you to stop the powerbrush motor for cleaning bare floors. It is for use on Miele S2000 (S2) and Classic C1 series models to mate with the SET 220 electric telescopic wand and SEB 217-3 powerbrush.

This SFS 10 Extension Hose stretches to enable you to reach 5 feet further with your Miele non-electric hose. It is used by removing your hose's curved handle, attaching the SFS 10 to your hose and then attaching the removed curved handle to the end of the extension hose. When not being used the silver hose collapses into the semi-rigid dark gray jacket and snaps closed. A short section of the silver stretch hose is visible in the photo since it is not completely closed. This extension hose is also known by part #07252210.

The SFS 10 Extension Hose mates with Miele non-electric hoses which have two tabs near the curved hose handle which can be easily depressed with your thumb and finger to removal the handle.   View Larger Image

This standard hose is for Miele S4000 (S4) and S5000 (S5) series vacuums which are not used with a powerbrush. The hose has the connector at the vacuum attached but not the curved hose handle that snaps onto it.

This standard hose is for Miele S500i & S600i series vacuums which are not used with a powerbrush. The cleaners which mate with this hose allow it to swivel 360° for greater flexibility when working close to the vacuum cleaner.   View Larger Image