Miele Turbo Comfort STB 205-3 Turbobrush
Miele Universal Upright 6' Hose & Steel Wand
Miele AllTeQ Rug/Bare Floor Nozzle #SBD 285-3
Deluxe AirTeQ Rug/Bare Floor Nozzle #SBD 650-3
Deluxe Rug/Bare Floor Nozzle #SBD 550-3
Miele SMC 20 MicroSet #41996087
Miele Stainless Steel Telescopic Wand #09265991
Deluxe Rug/Bare Floor Nozzle #SBD 450-3
Miele Rug/Bare Floor Nozzle #SBD 285-2
Miele Standard Floor Brush #SBB 235-2
This Miele Turbo Comfort STB 205-3 Turbobrush is equipped with long, soft bristles for your more delicate carpets. It is designed to clean low to medium nap carpets. The cog type belt provides positive power transfer from its turbine to the brush roll. This Turbobrush has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 series canister vacuums.
The Miele STB 205-3 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush. View Larger Image
The Miele STB 205-3 was discontinued in February 2019 and replaced with the newer, more aggressive Miele STB 305-3 Turbobrush. View Larger Image
Archived Retired Product - Not Available for Sale
This Miele Attachment Kit contains a long 6' hose and steel wand to add more versatility to your powerful Miele Quickstep, Universal or Little Giant Upright. The hose makes it much easier to use your small attachments while the wand provides extra reach for those high surfaces and ledges.
By using your vacuum's steel handle tube (wand) and Rug/Bare Floor nozzle plus this kit's wand and 6' hose your vacuum can be used like a canister vacuum to clean into corners otherwise unaccessable with the upright configuration.
By using your vacuum's steel handle tube (wand) and Rug/Bare Floor nozzle plus this kit's wand and 6' hose your vacuum can be used like a canister vacuum to clean into corners otherwise unaccessable with the upright configuration.
Archived Retired Product - Not Available for Sale
This Miele AllTeQ is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
View Larger Image
Archived Retired Product - Not Available for Sale
This unique AirTeQ combination nozzle has streamlined airflow for uninterrupted floor contact, superior cleaning results and minimum energy use. It performs well on all smooth flooring and low-pile carpeting. It has top mounted levers to easily switch between carpets and bare floors.
For bare floors brush strips around the perimeter pop out to provide a non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums. View Larger Image
For bare floors brush strips around the perimeter pop out to provide a non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums. View Larger Image
Archived Retired Product - Not Available for Sale
This is a combination tool with a top mounted foot pedal to switch between carpets and bare floors. For bare floors brush strips long the front and back pop out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strips are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
View Larger Image
Archived Retired Product - Not Available for Sale
This set of four attachments is especially designed for cleaning delicate items and collectibles throughout your house. Based around the Micro Hose with its combination crevice tool/dusting brush, this set extends its use by including an Extension Crevice Tool, Extension Dusting Brush and Angled Crevice Nozzle.
This attachment set have been discontinued by Miele. View Larger Image
This attachment set have been discontinued by Miele. View Larger Image
Archived Retired Product - Not Available for Sale
This Miele 2-Section Stainless Steel Telescopic Wand #09265991 is very convenient with its large latch release pads and adjustable height to match your stature. It is 40 3/4" long when fully extended and 23 7/8" long collapsed. The stainless steel construction keeps it working smoothly for years to come, even in high humidity areas. This wand was replaced by the Miele Stainless Steel Telescopic Wand #10615280 in April 2019.
View Larger Image
Archived Retired Product - Not Available for Sale
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip along the front and squeege along the back pop out to provide soft, non-scratching cleaning action. Notches along the front of the brush allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip and squeege are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. A soft, non-scratching roller under the elbow bears any downward pressure, enabling the nozzle to glide gently over the floor.
View Larger Image
Archived Retired Product - Not Available for Sale
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment's elbow has two tabs which hold this nozzle more securely in the parking slots on the Miele S500i and S600i series canisters. It also mates perfectly with the parking slots on the Miele vacuums in their S200i, S300i and S400i series canister vacuums.
View Larger Image
Archived Retired Product - Not Available for Sale
This genuine Miele floor brush is 12" wide and 2.5" deep, having brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle. This floor brush's elbow has two tabs which hold this nozzle more securely in the parking slots on the Miele S500i and S600i series canisters. It also mates perfectly with the parking slots on the Miele vacuums in their S200i, S300i and S400i series canister vacuums.
Miele has discontinued this floor brush. The Miele SBB Parquet-2 has better quality bristles so it is a good alternative. View Larger Image
Miele has discontinued this floor brush. The Miele SBB Parquet-2 has better quality bristles so it is a good alternative. View Larger Image
Archived Retired Product - Not Available for Sale