SteamVac Recovery Tank with Lid
Hayden "Where There's A Wall There's a Way" Booklet
SteamVac Tank Duct #38661003
Hayden Ivory SuperValve 3-Inlet Kit #3375-3
Hayden White SuperValve 3-Inlet Kit #3375-1
Hayden Ivory Standard 3-Inlet Kit #3317-3
Hayden White Standard 3-Inlet Kit #3317-1
Hayden Ivory SuperValve 1-Inlet Kit #3175-3
Hayden White SuperValve 1-Inlet Kit #3175-1
Hayden Ivory Standard 1-Inlet Kit #3117-3
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. This handle lays down against the tank lid to lock the lid on the tank. This recovery tank is for Hoover SteamVacs which have a small tank for the detergent along the side of the large clear water tank.
Archived Retired Product - Not Available for Sale
This Hayden "How To" Guide titled "Where There's A Wall There's a Way" will assist you in the planning and installation of your central vacuum and the Hayden SuperSystem. Written by Ted Hayden, Chairman and CEO of Hayden Industries Inc., this eighteen page booklet includes drawings and helpful tips for installing central vacuums in new or existing homes using either Hayden's standard wall inlets or their SuperValves.
View Larger Image
Archived Retired Product - Not Available for Sale
This SteamVac Recovery Tank Duct fits into the front of the earlier recovery tank. It is removed to attach the hose adapter to the recovery tank. The purpose of this part is to carry the recovered water from the top of the main nozzle up to the recovery tank lid. This duct is 4 1/2" high and tapers from 4 5/8" at the top to 4 1/2" at the bottom.
Archived Retired Product - Not Available for Sale
Kit containing three Ivory Hayden SuperValves and all the elbows, etc. needed for a typical three inlet installation. Included are
3 Ivory SuperValves w/Mounting Plates #791760,
3 Short 90° Elbows #752004,
9 Sweep 90° Elbows #752001,
6 45° Elbows #752008,
2 90° Sweep Tees #752003,
6 Pipe Couplers #752010,
6 Pipe Mounting Straps #752017,
1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
View Larger Image
Archived Retired Product - Not Available for Sale
Kit containing three White Hayden SuperValves and all the elbows, etc. needed for a typical three inlet installation. Included are
3 White SuperValves w/Mounting Plates #791760W,
3 Short 90° Elbows #752004,
9 Sweep 90° Elbows #752001,
6 45° Elbows #752008,
2 90° Sweep Tees #752003,
6 Pipe Couplers #752010,
6 Pipe Mounting Straps #752017,
1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
View Larger Image
Archived Retired Product - Not Available for Sale
Kit containing three Ivory Hayden Standard Inlets and all the elbows, etc. needed for a typical three inlet installation. Included are 3 Ivory Standard Inlets #1700-3, 3 Inlet Mounting Plates #1041-1, 3 Short 90° Elbows #2004-1, 9 Sweep 90° Elbows #2001-1, 6 45° Elbows #2008-1, 2 90° Sweep Tees #2003-1, 6 Pipe Couplers #2010-1, 6 Pipe Mounting Straps #2017-1, 1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
View Larger Image
Archived Retired Product - Not Available for Sale
Kit containing three White Hayden Standard Inlets and all the elbows, etc. needed for a typical three inlet installation. Included are
3 White Regular Valves w/Mounting Plates #791700W,
3 Mounting Plates #791041W,
3 Short 90° Elbows #752004,
9 Sweep 90° Elbows #752001,
6 45° Elbows #752008,
2 90° Sweep Tees #752003,
6 Pipe Couplers #752010,
6 Pipe Mounting Straps #752017,
1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
View Larger Image
Archived Retired Product - Not Available for Sale
Kit containing one Ivory Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory SuperValve w/Mounting Plate #1750-3, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
Archived Retired Product - Not Available for Sale
Kit containing one White Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White SuperValve w/Mounting Plate #1750-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
Archived Retired Product - Not Available for Sale
Kit containing one Ivory Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory Standard Inlet #1700-3, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale