HEPA Bag Kit for Hoover Savvy, Dual V and V2 Tech. Uprights
Hayden Ivory SuperValve w/Plate #791760
Miele Angular Hose Handle Cover for SES 100, SES 105, etc.
Paper Bag Kit for Hoover Savvy, Dual V and V2 Tech. Uprights
Hayden Ivory Standard 1-Inlet Kit #3117-3
Hayden White Standard 1-Inlet Kit #3117-1
SteamVac Recovery Tank with Lid
Black VacPan Kit #VP BL
Hayden Ivory SuperValve 1-Inlet Kit #3175-3
Ivory VacPan Kit #VP IV
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the transparent bag chamber, chamber lid, rubber bag seal and one Hoover "Type Y" 3M Filtrete® HEPA Filter Paper Bag. Simply remove the bagless dirt chamber and slide this assembly into the vacuum in its place.
View Larger Image
Archived Retired Product - Not Available for Sale
This Ivory Hayden SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Archived Retired Product - Not Available for Sale
This Miele Angular Hose Handle Cover #03766500 is for repair of the Miele hoses models SES 100, SES 105, SES 110 and SES 113. This item covers the switch and receptacle on these hoses.
View Larger Image
Archived Retired Product - Not Available for Sale
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the transparent bag chamber, chamber lid, rubber bag seal and one Hoover "Type Y" Allergen Filtration Paper Bag. Simply remove the bagless dirt chamber and slide this assembly into the vacuum in its place. Since the bagless unit contained a HEPA filter, you may wish to replace the vacuum's foam exhaust filter with a fan-fold HEPA Exhaust Filter #43613024 for reduced dust emissions.
View Larger Image
Archived Retired Product - Not Available for Sale
Kit containing one Ivory Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory Standard Inlet #1700-3, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale
Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White Standard Inlet #1700-1, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. This handle lays down against the tank lid to lock the lid on the tank. This recovery tank is for Hoover SteamVacs which have a small tank for the detergent along the side of the large clear water tank.
Archived Retired Product - Not Available for Sale
This Black VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.
To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Black QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Black QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
Kit containing one Ivory Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory SuperValve w/Mounting Plate #1750-3, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
Archived Retired Product - Not Available for Sale
This Ivory VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.
To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Ivory QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Ivory QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale