Hayden White SuperValve w/Plate #791790W
Code: 1750-1
Mfg. Code: 791790W
White Standard Inlet #791700W
Code: 1700-1
Mfg. Code: 791700W
Wessell Werk Round Brush Roll with Bearings
Code: 10.9048-302
Switch for Hayden Hose Handle #GRS-4023A-1300
Code: 2147
Mfg. Code: GRS-4023A-1300
SEBO X/G 2-Pc. Brush Roll - 5290AM
Code: 5290AM
SEBO X/G 1-Pc. Brush Roll - 5010AM
Code: 5010AM
Light Bulb - Miniature #27313101
Code: 27313101
Ivory Standard Inlet #791700
Code: 1700-3
Mfg. Code: 791700
Inlet Mounting Plate for 2x4 #791041W
Code: 1041-1
Mfg. Code: 791041W
Hayden Inlet Mounting Plate for 2x3 #791044W
Code: 1044-1
Mfg. Code: 791044W
This White SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$24.95
Visit Store
This White Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
Deluxe round Wessell Werk brush roll #10.9048-302 with large sleeve bearings. The bearing mounts are tapered to fit in the Wessel Werk EBK360 power nozzle. The cogged pulley is located at the end of the brush roll. The roll with bearings measures 13 3/8" long. This brush roll was previously contoured instead of round.
Ristenbatt Price:
$74.95
Visit Store
This switch #GRS-4023A-1300 is an identical replacement for the Hayden hose switch, being manufactured by CW Industries. Its configuration is double pole, double toggle with center off. It is rated at 13 amps @ 120 volts and fits into a 1/2" x 3/4" hole. This switch is also know by numbers 9001-00-000VX (Hayden) and 383482 (Eureka). It also fits various other central vacuum hoses like Nutone.
View Larger Image
View Larger Image
Ristenbatt Price:
$14.95
Visit Store
This SEBO 2-Pc. Brush Roll is designed for their wider Automatic X series and Essential G series uprights. The long piece is the same as the SEBO X/G 1-Pc. Brush Roll while the shorter one is for the other side of the belt pulley. Effectiveness is accomplished by arranging the bristles in a 360 degree convergent format on the brush roll. The steep spiral of the bristles, combined with its high speed, efficiently moves the dirt toward the dirt intake. The long wearing bristles are designed to withstand even hard commercial use.
Ristenbatt Price:
$49.95
Visit Store
This SEBO 1-Pc. Brush Roll is designed for their more narrow Automatic X series and Essential G series uprights. Effectiveness is accomplished by arranging the bristles in a 360 degree convergent format on the brush roll. The steep spiral of the bristles, combined with its high speed, efficiently moves the dirt toward the dirt intake. The long wearing bristles are designed to withstand even hard commercial use.
Ristenbatt Price:
$39.95
Visit Store
This miniature light bulb is for use in most later Hoover uprights. It is only 3/4" in diameter and about 1 1/2" long. One end is flat with wires which make contact when it is pushed straight into the light socket.
Ristenbatt Price:
$3.95
Visit Store
This Ivory Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 4 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$3.50
Visit Store