Miele Vacuum Accessories

This Miele 2-Section Aluminum Telescopic Wand #06801181 is light weight and very convenient with its large latch release pads and adjustable length. It is 26 3/8" long when fully extended and 16 1/2" long collapsed. Most people will find it to be too short to be used with a floor brush so an additional telescopic wand may be preferred. This is the wand that is packaged with all Miele S7 and Dynamic U1 upright vacuums on which it fits along the side of the vacuum attached to the hose.   View Larger Image

This genuine Miele Parquet Twister floor brush is specifically designed for cleaning Parquet floors although it will also work well on all bare floors. It is 12" wide having brush strips around its edges. Notches in the front brush strip allow dirt to easily enter the nozzle. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.   View Larger Image

This genuine Miele floor brush is specifically designed for cleaning Parquet floors although it will also work well on all bare floors. It is 12" wide and 2.5" deep, having brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front and back brush strips allow dirt to easily enter the nozzle. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums. This attachment is only available with some new Miele vacuums.   View Larger Image

This standard hose is for Miele S4000 (S4) and S5000 (S5) series vacuums which are not used with a powerbrush. The hose has the connector at the vacuum attached but not the curved hose handle that snaps onto it.