This SFS 10 Extension Hose stretches to enable you to reach 5 feet further with your Miele non-electric hose. It is used by removing your hose's curved handle, attaching the SFS 10 to your hose and then attaching the removed curved handle to the end of the extension hose. When not being used the silver hose collapses into the semi-rigid dark gray jacket and snaps closed. A short section of the silver stretch hose is visible in the photo since it is not completely closed. This extension hose is also known by part #07252210.
The SFS 10 Extension Hose mates with Miele non-electric hoses which have two tabs near the curved hose handle which can be easily depressed with your thumb and finger to removal the handle.
View Larger Image
This standard hose is for Miele S2000 (S2) and Classic C1 series vacuums which are not used with a powerbrush. The hose has the connector at the vacuum attached but not the curved hose handle that snaps onto it.
View Larger Image
This standard hose is for Miele S6000 (S6) and Compact C2 series vacuums which are not used with a powerbrush. The hose has the connector at the vacuum attached but not the curved hose handle that snaps onto it. This hose replaced #07461612 and #07461614.
Extend the reach of your vacuum cleaner with 35mm size attachments by 9' with this Lindhaus extension hose. Its great for stairs and reaching into areas where your vacuum can't go. The one end mates with your existing hose and the other straight end mates with 35mm attachments. This hose works nicely to extend the reach of Lindhaus and Miele uprights to clean a full flight of stairs.
This standard hose is for Miele S4000 (S4) and S5000 (S5) series vacuums which are not used with a powerbrush. The hose has the connector at the vacuum attached but not the curved hose handle that snaps onto it.
This standard hose is for Miele S300i & S400i series vacuums which are not used with a powerbrush. The cleaners which mate with this hose allow it to swivel 360° for greater flexibility when working close to the vacuum cleaner.
View Larger Image
This standard hose is for Miele S500i & S600i series vacuums which are not used with a powerbrush. The cleaners which mate with this hose allow it to swivel 360° for greater flexibility when working close to the vacuum cleaner.
View Larger Image
Electric Hose with a short cord at the machine end to plug into the vacuum cleaner. This 1 1/4" (32mm) ID hose is for use on Miele S200i series compact canisters to mate with the SEB 234 or SEB 213 powerbrush. These powerbrushes have cords which clip on the wand and are manually plugged into this hose. It can not be used on Miele S200i series vacuums that have a speed control on the hose.
This hose has not been available since the Spring of 2016 and there is no reasonable substitute available. Please see this Schematic of Repair Parts or contact us for ordering parts.
Electric Hose with a short cord at the machine end to plug into the vacuum cleaner. This hose is for use on Miele S312i, S314i, S401i and S434i canisters to mate with the SEB 234 or SEB 213 powerbrush. These powerbrushes have cords which clip on the wand and are manually plugged into this hose.
This hose has not been available since the Spring of 2016 and there is no reasonable substitute available. Please see this Schematic of Repair Parts or contact us for ordering parts.
Deluxe Electric Hose with direct connect ends at both the vacuum cleaner and wand. A fingertip switch on the deluxe handle enables you to stop the powerbrush motor for cleaning bare floors. For use on Miele S5000 (S5) series models to mate with the SET 220 or SET 210 electric telescopic wands and SEB 236 or SEB 217-3 powerbrush.