This genuine Miele floor brush is 12" wide and 2.5" deep, having brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle. This floor brush's elbow has two tabs which hold this nozzle more securely in the parking slots on the Miele S500i and S600i series canisters. It also mates perfectly with the parking slots on the Miele vacuums in their S200i, S300i and S400i series canister vacuums.
This genuine Miele floor brush is 12" wide and 2.5" deep, having brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
This genuine Miele floor brush is specifically designed for cleaning Parquet floors although it will also work well on all bare floors. It is 12" wide and 2.5" deep, having brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front and back brush strips allow dirt to easily enter the nozzle. This floor brush's elbow has two tabs which hold this nozzle more securely in the parking slots on the Miele S500i and S600i series canisters. It also mates perfectly with the parking slots on the Miele vacuums in their S200i, S300i and S400i series canister vacuums.
View Larger Image
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment's elbow has two tabs which hold this nozzle more securely in the parking slots on the Miele S500i and S600i series canisters. It also mates perfectly with the parking slots on the Miele vacuums in their S200i, S300i and S400i series canister vacuums.
View Larger Image
This Miele AllTeQ is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
View Larger Image
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip along the front and squeege along the back pop out to provide soft, non-scratching cleaning action. Notches along the front of the brush allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip and squeege are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. A soft, non-scratching roller under the elbow bears any downward pressure, enabling the nozzle to glide gently over the floor.
View Larger Image
This is a combination tool with a top mounted foot pedal to switch between carpets and bare floors. For bare floors brush strips long the front and back pop out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strips are retracted, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
View Larger Image
This unique AirTeQ combination nozzle has streamlined airflow for uninterrupted floor contact, superior cleaning results and minimum energy use. It performs well on all smooth flooring and low-pile carpeting. It has top mounted levers to easily switch between carpets and bare floors.
For bare floors brush strips around the perimeter pop out to provide a non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled sole plate to contact the carpet, pulling air through the nap to clean it. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
View Larger Image