Hoover

This genuine Hoover Bagless Canister Primary Filter fits inside the dirt container on all Hoover Bagless canisters. It consists of a cylinder shaped cartridge with fanfold filter media between the beige ends. This long life filter can be washed by holding it under running water. The fanfold design provides a large filter media area for reduced resistance to air flow.

This generic 35mm Floor Brush will fit the Hoover Duros and Maytag canisters in their S3590 series. It is 11.75" wide and 2.5" deep, having natural hair brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle.

The wands and floor nozzles on the Hoover canisters this floor brush fits typically fit over the wand and have release buttons on them since they lock on. This nozzle simply friction fits over the wand without a locking device.

For the same nozzle to fit Hoover uprights and bagless canisters with the 1 1/4" USA size, see the Deluxe 12" Floor Brush (1 1/4"). If your attachments have pins and fit inside the wand, see the Hoover 9" Floor Brush with Pin.   View Larger Image

This genuine Hoover Bagless Canister HEPA Exhaust Filter fits inside the retainer on the side of the Hoover Bagless WindTunnel Canisters. It consists of fanfold filter media in a round black plastic cartridge. This filter provides a high level of filtration which meets the stringent HEPA specification for the air that passes through it.   View Larger Image

This HEPA Exhaust Filter fits in a door on the side of the Hoover Windtunnel upright vacuums. It consists of fanfold filter media in a white plastic cartridge. The cartridge measures 10 15/16" x 3 3/8" x 1/2". A seal around its edge ensures that the air passes through it, not around it like the Genuine Hoover version. This design provides a large filter media area for reduced resistance to air flow while producing a high level of filtration which meets the stringent HEPA specification for the air that passes through it.