Hayden White Standard 1-Inlet Kit #3117-1
Thin Knit Hose Sock for Central Vacuum Hose #7650962133
Hayden Ivory SuperValve w/Plate #791760
Hayden Filter Retainer Disk
Hayden 6' SuperHose Cord #3585-2
Black QuickTrim Kit #QT BL
Hayden "Where There's A Wall There's a Way" Booklet
Ivory QuickTrim Kit #QT IV
White QuickTrim Kit #QT WH
1/4 Pint PVC Cement #107100051
Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White Standard Inlet #1700-1, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale
This thin knit hose sock slips over your central vacuum hose to help protect your furniture and walls. This is made by VacSoc Inc. to fit all 30' central vacuum hoses.
Archived Retired Product - Not Available for Sale
This Ivory Hayden SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Archived Retired Product - Not Available for Sale
This filter retainer disk holds the fan-fold filter cartridge in place in most Hayden SuperVac power units. It has two tabs that lock into the filter post with a twisting motion. This retainer is 4 7/8" in diameter. The foam disk pictured with the retainer is not included with it.
View Larger Image
Archived Retired Product - Not Available for Sale
This hose cord is required to use the Hayden SuperHose (part of SuperPack Attachment Kit) with Hayden's standard wall inlets. It plugs into the hose end at the wall inlet and then into a standard electrical outlet to provide current to run the power nozzle. The Hayden SuperPack II attachment kits include this cord, enabling them to be configured with a cord or for direct connection
to the Hayden SuperValves.
to the Hayden SuperValves.
Archived Retired Product - Not Available for Sale
If mounting a Black VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This Black QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
This Hayden "How To" Guide titled "Where There's A Wall There's a Way" will assist you in the planning and installation of your central vacuum and the Hayden SuperSystem. Written by Ted Hayden, Chairman and CEO of Hayden Industries Inc., this eighteen page booklet includes drawings and helpful tips for installing central vacuums in new or existing homes using either Hayden's standard wall inlets or their SuperValves.
View Larger Image
Archived Retired Product - Not Available for Sale
If mounting an Ivory VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This Ivory QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
If mounting a White VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This White QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
This 1/4 Pint of PVC comes with a lid mounted swab for applying it to the pipe when installing a central vacuum system. It is generally recommended to be applied to the pipe but not the elbow, coupler, etc. to prevent any beading on the inside which could catch dirt and fuzz. Twisting the pipe as it is inserted aids in the assembly and spreads the cement more evenly.
Archived Retired Product - Not Available for Sale