Vacuum Accessories
Type of Product:
Current Products
Plastic SEBO 38mm to 1 1/4" Tool Adapter
This plastic SEBO attachment adapter fits on all SEBO Canister and upright hoses and wands to enable the use of standard USA 1 1/4" attachments. These include ....
Show More
This plastic SEBO attachment adapter fits on all SEBO Canister and upright hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
Show Less
Nilfisk Deluxe Rug/Floor Nozzle #1408492520
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to ....
Show More
This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled steel sole plate to contact the carpet, pulling air through the nap to clean it. This nozzle replaces the earlier #120410000
Show Less
Eureka 1373 "Express Series" Power Nozzle
This is the most deluxe Eureka power nozzle featuring a steel brush roll with replaceable brush strips, beater bars which also stiffen the bristles, large easy ....
Show More
This is the most deluxe Eureka power nozzle featuring a steel brush roll with replaceable brush strips, beater bars which also stiffen the bristles, large easy rolling wheels and a bright headlight. It is significantly better designed and constructed than the Eureka "World Vac Series" power nozzle. This power nozzle has been replaced by the Sweep n Groom model E1386K-1 power nozzle which is the same except for no headlight.
Show Less
115305 - Crevice Brush
This Nilfisk crevice brush is designed to attach to the end of their Flat Crevice Tool for cleaning the old fashioned radiators, etc. It extends the reach by ....
Show More
This Nilfisk crevice brush is designed to attach to the end of their Flat Crevice Tool for cleaning the old fashioned radiators, etc. It extends the reach by about 5" and adds brushing action with a 1" diameter "bottle brush" which wraps around its tip.
Show Less
Miele to 1 1/4" Steel Tool Adapter #095-M
This steel 5 3/4" long attachment adapter is not made by Miele but fits on all Miele Canister plus U1, S7 and Universal Upright hoses and wands to enable the ....
Show More
This steel 5 3/4" long attachment adapter is not made by Miele but fits on all Miele Canister plus U1, S7 and Universal Upright hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
This adapter will not fit the Miele Powerhouse Uprights since their attachments fit inside the hose and wands. For these vacuums use the Miele Powerhouse Upright to 1 1/4" Adapter instead of this one. Show Less
This adapter will not fit the Miele Powerhouse Uprights since their attachments fit inside the hose and wands. For these vacuums use the Miele Powerhouse Upright to 1 1/4" Adapter instead of this one. Show Less
Lindhaus 35mm to 1 1/4" Tool Adapter
This steel 5 3/4" long attachment adapter fits on Lindhaus upright hoses and wands to enable the use of standard USA 1 1/4" attachments. These include ....
Show More
This steel 5 3/4" long attachment adapter fits on Lindhaus upright hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page. SEBO uses a different size so this adapter can not be used with their vacuums.
Show Less
Hoover Duro & Maytag to 1 1/4" Tool Adapter
This steel 5 3/4" long 35mm to 1 1/4" adapter will fit the Hoover Duro and Maytag canisters in their S3590 series to enable the use of standard USA 1 1/4" ....
Show More
This steel 5 3/4" long 35mm to 1 1/4" adapter will fit the Hoover Duro and Maytag canisters in their S3590 series to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
Show Less
Steel European to 1 1/4" Tool Adapter #095
This steel 5 3/4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include ....
Show More
This steel 5 3/4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
Show Less
Miele Stainless Steel Telescopic Wand #09265991
This Miele 2-Section Stainless Steel Telescopic Wand #09265991 is very convenient with its large latch release pads and adjustable height to match your stature. ....
Show More
This Miele 2-Section Stainless Steel Telescopic Wand #09265991 is very convenient with its large latch release pads and adjustable height to match your stature. It is 40 3/4" long when fully extended and 23 7/8" long collapsed. The stainless steel construction keeps it working smoothly for years to come, even in high humidity areas. This wand was replaced by the Miele Stainless Steel Telescopic Wand #10615280 in April 2019.
Show Less
Miele Hygiene Cap Canister Hose Inlets
This Miele Hose Inlet Hygiene Cap can be snapped into the hose inlets on most Miele canisters after the hose is removed. This added protection enhances the ....
Show More
This Miele Hose Inlet Hygiene Cap can be snapped into the hose inlets on most Miele canisters after the hose is removed. This added protection enhances the ability of the Miele vacuums in these series to provide extremely low dust emissions. A clip is incorporated into this special cap to enable it to be clipped to the hose when removed from the hose inlet. View the larger image to see how it fits into the hose inlet.
Show Less
Categories
Canisters & Power Teams
Miele Canisters
- Miele HomeCare
(In-Store Only) - Miele Complete C3
(Formerly S8) - Miele CX1 Blizzard
Bagless Vacuums - Miele Compact C1
(S4 Style Case) - Miele Classic C1
(Formerly S2) - Miele Compact C2
Retired 2021 - Miele Compact C2
Retired 2017 - Miele S2 Canisters
Retired 2015 - Miele S5 Canisters
Retired 2012 - Miele S4 Canisters
Retired 2011 - Miele S500i & S600i
Retired 2006 - Miele S300i Series
Retired 2003 - Miele S200i Series
Retired
- Miele HomeCare
- SEBO Canisters
- Sanitaire Canisters
- Titan Power Teams
- Electrolux/Precision
Retired - Sirena Canisters
- Panasonic Canisters
Retired - Eureka Canisters
Retired - Hoover Canisters
Retired
Upright Vacuums
Stick Vacuums
Central Vacuums
Bags
Filters
Belts
Light Bulbs
Hoses
Wands
Power Nozzles
Turbine Nozzles
Floor Nozzles
Dusting Brushes
Upholstery Nozzles
Crevice Tools
Special Attachments
Parts & Misc. Supplies
- Central Vac Inlets, Elbows, etc.