Miele Hose Switch & Receptacle Assembly
Code: 03682772
Miele Tubular Electric Hose Handle
Code: 03697380
Wessell Werk Round Brush Roll with Bearings
Code: 10.9048-302
Inlet Mounting Plate for 2x4 #791041W
Code: 1041-1
Mfg. Code: 791041W
Hayden Inlet Mounting Plate for 2x3 #791044W
Code: 1044-1
Mfg. Code: 791044W
White Standard Inlet #791700W
Code: 1700-1
Mfg. Code: 791700W
Ivory Standard Inlet #791700
Code: 1700-3
Mfg. Code: 791700
Hayden White SuperValve w/Plate #791790W
Code: 1750-1
Mfg. Code: 791790W
Central 90 Sweep Elbow
Code: 2001-1
Mfg. Code: 765510W
Central 90 Sweep Spigot #765511W
Code: 2002-1
Mfg. Code: 765511W
This Miele hose switch & receptacle assembly #03682772 is for use in the Miele hoses models SES 100, SES 105, SES 110 and SES 113 to replace failed switches or receptacles. This is the most common failure with these hoses when they do not conduct electric to supply the powerbrush.
View Larger Image
Ristenbatt Price:
$149.95
Visit Store
This Miele Electric Hose Handle #03697380 is for repair of the Miele hoses models SES 100, SES 105, SES 110 and SES 113. These can break in the tubular part where the wand attaches. This item does not include the upper angular cover that holds the switch and receptacle nor does it include the switch, etc.
View Larger Image
Ristenbatt Price:
$107.64
Visit Store
Deluxe round Wessell Werk brush roll #10.9048-302 with large sleeve bearings. The bearing mounts are tapered to fit in the Wessel Werk EBK360 power nozzle. The cogged pulley is located at the end of the brush roll. The roll with bearings measures 13 3/8" long. This brush roll was previously contoured instead of round.
Ristenbatt Price:
$74.95
Visit Store
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 4 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This White Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This Ivory Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This White SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$44.95
Visit Store
This white 90° Sweep Elbow is designed to couple two pipes at a corner in a central vacuum pipe system. If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white 90° Sweep Spigot is designed to couple a pipe and an elbow in a central vacuum pipe system. This spigot & elbow combination is handy where there is an offset between two pipes at a corner and space is limited.
If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. One opening is male to mate with the standard "Schedule L" thin wall PVC pipe. The other opening is female to mate with an elbow, tee, etc. View Larger Image
If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. One opening is male to mate with the standard "Schedule L" thin wall PVC pipe. The other opening is female to mate with an elbow, tee, etc. View Larger Image
Ristenbatt Price:
$1.75
Visit Store