Central Vacuum Hayden Exhaust Vent Cap #793030W
Code: 3030-1
Mfg. Code: 793030W
Ivory Standard Inlet #791700
Code: 1700-3
Mfg. Code: 791700
White Standard Inlet #791700W
Code: 1700-1
Mfg. Code: 791700W
Switch for Hayden Hose Handle #GRS-4023A-1300
Code: 2147
Mfg. Code: GRS-4023A-1300
30035-00-0 - Full Filter Frame
Code: 30035-00-0
Mfg. Code: 30035-00-0
Central Vacuum Exhaust Muffler #765500W
Code: 2020-14
Mfg. Code: 765500W
Central Vacuum Hayden Motor Muffler #2029-28
Code: 2029-28
Mfg. Code: 2029-28
Hayden White SuperValve w/Plate #791790W
Code: 1750-1
Mfg. Code: 791790W
SEBO X/G 1-Pc. Brush Roll - 5010AM
Code: 5010AM
SEBO X/G 2-Pc. Brush Roll - 5290AM
Code: 5290AM
This white Hayden Exhaust Vent Cap mounts on the outside of your house where the central vacuum exhausts the air. It has a 2 1/2" square flap which blows open when the vacuum runs and closes automatically when not running. Two screw holes on 3 5/8" centers enable you to secure it to the wall.
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$6.95
Visit Store
This Ivory Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This White Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This switch #GRS-4023A-1300 is an identical replacement for the Hayden hose switch, being manufactured by CW Industries. Its configuration is double pole, double toggle with center off. It is rated at 13 amps @ 120 volts and fits into a 1/2" x 3/4" hole. This switch is also know by numbers 9001-00-000VX (Hayden) and 383482 (Eureka). It also fits various other central vacuum hoses like Nutone.
View Larger Image
View Larger Image
Ristenbatt Price:
$14.95
Visit Store
This metal Filter Frame is made by the Shop-Vac Corporation
Ristenbatt Price:
$19.50
Visit Store
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$19.95
Visit Store
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
Ristenbatt Price:
$19.95
Visit Store
This White SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$24.95
Visit Store
This SEBO 1-Pc. Brush Roll is designed for their more narrow Automatic X series and Essential G series uprights. Effectiveness is accomplished by arranging the bristles in a 360 degree convergent format on the brush roll. The steep spiral of the bristles, combined with its high speed, efficiently moves the dirt toward the dirt intake. The long wearing bristles are designed to withstand even hard commercial use.
Ristenbatt Price:
$39.95
Visit Store
This SEBO 2-Pc. Brush Roll is designed for their wider Automatic X series and Essential G series uprights. The long piece is the same as the SEBO X/G 1-Pc. Brush Roll while the shorter one is for the other side of the belt pulley. Effectiveness is accomplished by arranging the bristles in a 360 degree convergent format on the brush roll. The steep spiral of the bristles, combined with its high speed, efficiently moves the dirt toward the dirt intake. The long wearing bristles are designed to withstand even hard commercial use.
Ristenbatt Price:
$49.95
Visit Store