Result pages:
123
Hayden Filter Retainer Disk
This filter retainer disk holds the fan-fold filter cartridge in place in most Hayden SuperVac power units. It has two tabs that lock into the filter post with a twisting motion. This retainer is 4 7/8" in diameter. The foam disk pictured with the retainer is not included with it.
View Larger Image
Archived Retired Product - Not Available for Sale
SteamVac Tank Duct #38661003
This SteamVac Recovery Tank Duct fits into the front of the earlier recovery tank. It is removed to attach the hose adapter to the recovery tank. The purpose of this part is to carry the recovered water from the top of the main nozzle up to the recovery tank lid. This duct is 4 1/2" high and tapers from 4 5/8" at the top to 4 1/2" at the bottom.
Archived Retired Product - Not Available for Sale
HEPA Bag Kit for Hoover Savvy, Dual V and V2 Tech. Uprights
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the transparent bag chamber, chamber lid, rubber bag seal and one
Hoover "Type Y" 3M Filtrete® HEPA Filter Paper Bag. Simply remove the bagless dirt chamber and slide this assembly into the vacuum in its place.
View Larger Image
Archived Retired Product - Not Available for Sale
Paper Bag Kit for Hoover Savvy, Dual V and V2 Tech. Uprights
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the transparent bag chamber, chamber lid, rubber bag seal and one
Hoover "Type Y" Allergen Filtration Paper Bag. Simply remove the bagless dirt chamber and slide this assembly into the vacuum in its place. Since the bagless unit contained a HEPA filter, you may wish to replace the vacuum's foam exhaust filter with a fan-fold
HEPA Exhaust Filter #43613024 for reduced dust emissions.
View Larger Image
Archived Retired Product - Not Available for Sale
BU-2 - 25 Watt Light Bulb
This 25 Watt Light Bulb is for use in most power nozzles which have the bayonet style socket. It is 7/8" in diameter and 2 1/8" long including its metal base. The 5/8" diameter base with two pins locks into the socket with a twist. The base has two rounded electrical contacts on its end.
Archived Retired Product - Not Available for Sale
1/4 Pint PVC Cement #107100051
This 1/4 Pint of PVC comes with a lid mounted swab for applying it to the pipe when installing a central vacuum system. It is generally recommended to be applied to the pipe but not the elbow, coupler, etc. to prevent any beading on the inside which could catch dirt and fuzz. Twisting the pipe as it is inserted aids in the assembly and spreads the cement more evenly.
Archived Retired Product - Not Available for Sale
20 Guage Low Voltage Wire #20GA2-100
This 100' roll of 20 Guage Low Voltage Wire is typically used to connect the wall inlets to the central vacuum main power unit to control its motor. This Class 2 wire passes all building code requirements for this type of use.
When installing Hayden SuperVac systems, connect the same colored wire to the same side of the inlet valves. If the LED on the SuperHose does not mirror the color of the one on the SuperVac, simply reverse the two wires at the SuperVac unit.
Archived Retired Product - Not Available for Sale
Black QuickTrim Kit #QT BL
If mounting a
Black VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This Black QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
Black VacPan Kit #VP BL
This Black VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.
To attach to a pipe coming up through the floor, you will also need one
Short 90° Elbow #2004-1, one
Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The
Black QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
Hayden "Where There's A Wall There's a Way" Booklet
This Hayden "How To" Guide titled "Where There's A Wall There's a Way" will assist you in the planning and installation of your central vacuum and the Hayden SuperSystem. Written by Ted Hayden, Chairman and CEO of Hayden Industries Inc., this eighteen page booklet includes drawings and helpful tips for installing central vacuums in new or existing homes using either Hayden's standard wall inlets or their SuperValves.
View Larger Image
Archived Retired Product - Not Available for Sale
Result pages:
123
https://www.ristenbatt.com/xcart/Parts-and-Components.html