White VacPan Kit #VP WH
Hayden White SuperValve 3-Inlet Kit #3375-1
Hayden White SuperValve 1-Inlet Kit #3175-1
Hayden White Standard 3-Inlet Kit #3317-1
Hayden White Standard 1-Inlet Kit #3117-1
White QuickTrim Kit #QT WH
Wessell Werk Round Brush Roll with Bearings
SteamVac Tank Duct #38661003
SteamVac Recovery Tank with Lid
Nilfisk Power Cord - 219522-00
This White VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.
To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The White QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The White QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
Kit containing three White Hayden SuperValves and all the elbows, etc. needed for a typical three inlet installation. Included are
3 White SuperValves w/Mounting Plates #791760W,
3 Short 90° Elbows #752004,
9 Sweep 90° Elbows #752001,
6 45° Elbows #752008,
2 90° Sweep Tees #752003,
6 Pipe Couplers #752010,
6 Pipe Mounting Straps #752017,
1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
View Larger Image
Archived Retired Product - Not Available for Sale
Kit containing one White Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White SuperValve w/Mounting Plate #1750-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
Archived Retired Product - Not Available for Sale
Kit containing three White Hayden Standard Inlets and all the elbows, etc. needed for a typical three inlet installation. Included are
3 White Regular Valves w/Mounting Plates #791700W,
3 Mounting Plates #791041W,
3 Short 90° Elbows #752004,
9 Sweep 90° Elbows #752001,
6 45° Elbows #752008,
2 90° Sweep Tees #752003,
6 Pipe Couplers #752010,
6 Pipe Mounting Straps #752017,
1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
View Larger Image
Archived Retired Product - Not Available for Sale
Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White Standard Inlet #1700-1, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale
If mounting a White VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This White QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
Deluxe round Wessell Werk brush roll with large sleeve bearings. The brush roll has a slot running along its length to enable you to easily remove wrapped string and hair with a scissors. The bearing mounts are tapered to fit in the Wessel Werk EBK340 power nozzle. The roll with bearings measures 12.75" long. The pulley with cogs for the belt is at the end of the brush roll next to the bearing.
Archived Retired Product - Not Available for Sale
This SteamVac Recovery Tank Duct fits into the front of the earlier recovery tank. It is removed to attach the hose adapter to the recovery tank. The purpose of this part is to carry the recovered water from the top of the main nozzle up to the recovery tank lid. This duct is 4 1/2" high and tapers from 4 5/8" at the top to 4 1/2" at the bottom.
Archived Retired Product - Not Available for Sale
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. This handle lays down against the tank lid to lock the lid on the tank. This recovery tank is for Hoover SteamVacs which have a small tank for the detergent along the side of the large clear water tank.
Archived Retired Product - Not Available for Sale
This Nilfisk 30' heavy duty AGW 18/2 power cord is for use on their Allergy Vacuums. The machine end plug has two female slots to mate with the vacuum's male cord connector. The wall end has a male plug with two flat prongs. This is NOT a three wire grounded cord.
Archived Retired Product - Not Available for Sale