Miele Angular Hose Handle Cover for SES 100, SES 105, etc.
Wessell Werk Round Brush Roll with Bearings
1/4 Pint PVC Cement #107100051
Hayden Ivory SuperValve w/Plate #791760
Hayden 90 Short Tee #2033-1
20 Guage Low Voltage Wire #20GA2-100
Nilfisk Power Cord - 219522-00
30035-00-0 - Full Filter Frame
Hayden White Standard 1-Inlet Kit #3117-1
Hayden Ivory Standard 1-Inlet Kit #3117-3
This Miele Angular Hose Handle Cover #03766500 is for repair of the Miele hoses models SES 100, SES 105, SES 110 and SES 113. This item covers the switch and receptacle on these hoses.
View Larger Image
Archived Retired Product - Not Available for Sale
Deluxe round Wessell Werk brush roll with large sleeve bearings. The brush roll has a slot running along its length to enable you to easily remove wrapped string and hair with a scissors. The bearing mounts are tapered to fit in the Wessel Werk EBK340 power nozzle. The roll with bearings measures 12.75" long. The pulley with cogs for the belt is at the end of the brush roll next to the bearing.
Archived Retired Product - Not Available for Sale
This 1/4 Pint of PVC comes with a lid mounted swab for applying it to the pipe when installing a central vacuum system. It is generally recommended to be applied to the pipe but not the elbow, coupler, etc. to prevent any beading on the inside which could catch dirt and fuzz. Twisting the pipe as it is inserted aids in the assembly and spreads the cement more evenly.
Archived Retired Product - Not Available for Sale
This Ivory Hayden SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Archived Retired Product - Not Available for Sale
This white Hayden 90° Short Tee is designed for mounting two standard inlet valves exactly opposite each other in the same 2 x 4 wall. SuperValves can not be mounted this way due to their electrical boxes. All three female openings mate with the standard "Schedule L" thin wall PVC pipe and inlet mounting plates.
Archived Retired Product - Not Available for Sale
This 100' roll of 20 Guage Low Voltage Wire is typically used to connect the wall inlets to the central vacuum main power unit to control its motor. This Class 2 wire passes all building code requirements for this type of use.
When installing Hayden SuperVac systems, connect the same colored wire to the same side of the inlet valves. If the LED on the SuperHose does not mirror the color of the one on the SuperVac, simply reverse the two wires at the SuperVac unit.
When installing Hayden SuperVac systems, connect the same colored wire to the same side of the inlet valves. If the LED on the SuperHose does not mirror the color of the one on the SuperVac, simply reverse the two wires at the SuperVac unit.
Archived Retired Product - Not Available for Sale
This Nilfisk 30' heavy duty AGW 18/2 power cord is for use on their Allergy Vacuums. The machine end plug has two female slots to mate with the vacuum's male cord connector. The wall end has a male plug with two flat prongs. This is NOT a three wire grounded cord.
Archived Retired Product - Not Available for Sale
This metal Filter Frame is made by the Shop-Vac Corporation
Archived Retired Product - Not Available for Sale
Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White Standard Inlet #1700-1, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale
Kit containing one Ivory Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory Standard Inlet #1700-3, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale