Parts & Components


Type of Product:
Retired Products
Wessell Werk Round Brush Roll with Bearings
Ristenbatt Price: $74.95
Code: 10.9048-302
Deluxe round Wessell Werk brush roll #10.9048-302 with large sleeve bearings. The bearing mounts are tapered to fit in the Wessel Werk EBK360 power nozzle. The ....   Show More
Deluxe round Wessell Werk brush roll #10.9048-302 with large sleeve bearings. The bearing mounts are tapered to fit in the Wessel Werk EBK360 power nozzle. The cogged pulley is located at the end of the brush roll. The roll with bearings measures 13 3/8" long. This brush roll was previously contoured instead of round.
  Show Less
SEBO X/G 2-Pc. Brush Roll - 5290AM
Ristenbatt Price: $49.95
Code: 5290AM
This SEBO 2-Pc. Brush Roll is designed for their wider Automatic X series and Essential G series uprights. The long piece is the same as the SEBO X/G 1-Pc. ....   Show More
This SEBO 2-Pc. Brush Roll is designed for their wider Automatic X series and Essential G series uprights. The long piece is the same as the SEBO X/G 1-Pc. Brush Roll while the shorter one is for the other side of the belt pulley. Effectiveness is accomplished by arranging the bristles in a 360 degree convergent format on the brush roll. The steep spiral of the bristles, combined with its high speed, efficiently moves the dirt toward the dirt intake. The long wearing bristles are designed to withstand even hard commercial use.   Show Less
SteamVac Recovery Tank with Lid
Ristenbatt Price: $49.95
Code: 42272172
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. ....   Show More
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. This handle lays down against the tank lid to lock the lid on the tank. This recovery tank is for Hoover SteamVacs which have a small tank for the detergent along the side of the large clear water tank.   Show Less
SEBO X/G 1-Pc. Brush Roll - 5010AM
Ristenbatt Price: $39.95
Code: 5010AM
This SEBO 1-Pc. Brush Roll is designed for their more narrow Automatic X series and Essential G series uprights. Effectiveness is accomplished by arranging the ....   Show More
This SEBO 1-Pc. Brush Roll is designed for their more narrow Automatic X series and Essential G series uprights. Effectiveness is accomplished by arranging the bristles in a 360 degree convergent format on the brush roll. The steep spiral of the bristles, combined with its high speed, efficiently moves the dirt toward the dirt intake. The long wearing bristles are designed to withstand even hard commercial use.   Show Less
Hayden White SuperValve w/Plate #791790W
Ristenbatt Price: $24.95
Code: 1750-1
Mfg. Code: 791790W
This White SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. ....   Show More
This White SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.

A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.   Show Less
Central Vacuum Exhaust Muffler #765500W
Ristenbatt Price: $19.95
Code: 2020-14
Mfg. Code: 765500W
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the ....   Show More
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.

This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.   Show Less
Central Vacuum Hayden Motor Muffler #2029-28
Ristenbatt Price: $19.95
Code: 2029-28
Mfg. Code: 2029-28
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary ....   Show More
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.

This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.   Show Less
30035-00-0 - Full Filter Frame
Ristenbatt Price: $19.50
Code: 30035-00-0
Mfg. Code: 30035-00-0
This metal Filter Frame is made by the Shop-Vac Corporation
This metal Filter Frame is made by the Shop-Vac Corporation   Show Less
Switch for Hayden Hose Handle #GRS-4023A-1300
Ristenbatt Price: $14.95
Code: 2147
Mfg. Code: GRS-4023A-1300
This switch #GRS-4023A-1300 is an identical replacement for the Hayden hose switch, being manufactured by CW Industries. Its configuration is double pole, ....   Show More
This switch #GRS-4023A-1300 is an identical replacement for the Hayden hose switch, being manufactured by CW Industries. Its configuration is double pole, double toggle with center off. It is rated at 13 amps @ 120 volts and fits into a 1/2" x 3/4" hole. This switch is also know by numbers 9001-00-000VX (Hayden) and 383482 (Eureka). It also fits various other central vacuum hoses like Nutone.
  Show Less
Ivory Standard Inlet #791700
Ristenbatt Price: $9.95
Code: 1700-3
Mfg. Code: 791700
This Ivory Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° ....   Show More
This Ivory Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.   Show Less


Close
Close

Product Search


Advanced Product Search Advanced Full-Site Search Product Features Search

Shop with Confidence




Norton Secure Seal

McAfee Secure Seal

Trustwave Trusted Commerce Seal

Categories

Types

Brands

Close panel
Close panel

User Activities

Close panel