Result pages:
123
White VacPan Kit #VP WH
This White VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.
To attach to a pipe coming up through the floor, you will also need one
Short 90° Elbow #2004-1, one
Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The
White QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
Hayden White SuperValve 3-Inlet Kit #3375-1
Archived Retired Product - Not Available for Sale
Hayden White SuperValve 1-Inlet Kit #3175-1
Archived Retired Product - Not Available for Sale
Hayden White Standard 3-Inlet Kit #3317-1
Kit containing three White Hayden Standard Inlets and all the elbows, etc. needed for a typical three inlet installation. Included are
3
White Regular Valves w/Mounting Plates #791700W,
3
Mounting Plates #791041W,
3
Short 90° Elbows #752004,
9
Sweep 90° Elbows #752001,
6
45° Elbows #752008,
2
90° Sweep Tees #752003,
6
Pipe Couplers #752010,
6
Pipe Mounting Straps #752017,
1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
View Larger Image
Archived Retired Product - Not Available for Sale
Hayden White Standard 1-Inlet Kit #3117-1
Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1
White Standard Inlet #1700-1, 1
Inlet Mounting Plate #1041-1, 1
Short 90° Elbow #2004-1, 3
Sweep 90° Elbows #2001-1, 2
45° Elbows #2008-1, 1
90° Sweep Tee #2003-1, 3
Pipe Couplers #2010-1, 2
Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale
White QuickTrim Kit #QT WH
If mounting a
White VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This White QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
SteamVac Tank Duct #38661003
This SteamVac Recovery Tank Duct fits into the front of the earlier recovery tank. It is removed to attach the hose adapter to the recovery tank. The purpose of this part is to carry the recovered water from the top of the main nozzle up to the recovery tank lid. This duct is 4 1/2" high and tapers from 4 5/8" at the top to 4 1/2" at the bottom.
Archived Retired Product - Not Available for Sale
SteamVac Recovery Tank with Lid
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. This handle lays down against the tank lid to lock the lid on the tank. This recovery tank is for Hoover SteamVacs which have a small tank for the detergent along the side of the large clear water tank.
Archived Retired Product - Not Available for Sale
Miele Angular Hose Handle Cover for SES 100, SES 105, etc.
This Miele Angular Hose Handle Cover #03766500 is for repair of the Miele hoses models SES 100, SES 105, SES 110 and SES 113. This item covers the switch and receptacle on these hoses.
View Larger Image
Archived Retired Product - Not Available for Sale
Ivory VacPan Kit #VP IV
This Ivory VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.
To attach to a pipe coming up through the floor, you will also need one
Short 90° Elbow #2004-1, one
Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The
Ivory QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale
Result pages:
123
https://www.ristenbatt.com/xcart/Parts-and-Components-Mobile-Page.html