Parts & Components


Type of Product:
Retired Products
Sort by:
Code Product Price Reverse Order
Central 45 Double Wye #752145
Ristenbatt Price: $3.50
Code: 2045-1
Mfg. Code: 752145
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are ....   Show More
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are sometimes used with this wye to couple two in-line branches with a main pipe at a 90° angle.

This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe.   Show Less
Central 45 Short Spigot #765518W
Ristenbatt Price: $1.75
Code: 2009-1
Mfg. Code: 765518W
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with ....   Show More
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with a 45° Double Wye #752145 where two in-line branches join with a main pipe line at a 90° angle.

If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc.   Show Less
Central 45 Elbow #2008-1
Ristenbatt Price: $1.75
Code: 2008-1
Mfg. Code: SV8056
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short ....   Show More
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short pipe between them to form a 90° bend in the system.

If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.   Show Less
Central 90 Short Spigot #2021-1
Ristenbatt Price: $1.75
Code: 2021-1
Mfg. Code: 752021
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a ....   Show More
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.

One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.   Show Less
Central 90 Short Elbow #765506W
Ristenbatt Price: $1.75
Code: 2004-1
Mfg. Code: 765506W
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object ....   Show More
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object which is able to get through this short elbow should also pass through the others easily.

If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate.   Show Less
Central 90 Sweep Tee #765501W
Ristenbatt Price: $3.50
Code: 2003-1
Mfg. Code: 765501W
This white Central 90° Sweep Tee is designed to couple a branch line to a main line in a central vacuum pipe system. If a line were drawn through the ....   Show More
This white Central 90° Sweep Tee is designed to couple a branch line to a main line in a central vacuum pipe system. If a line were drawn through the center of the sweep part, it would form a 90° arc with a 2.5" radius. All three female openings mate with the standard "Schedule L" thin wall PVC pipe.   Show Less
Central 90 Sweep Spigot #765511W
Ristenbatt Price: $1.75
Code: 2002-1
Mfg. Code: 765511W
This white 90° Sweep Spigot is designed to couple a pipe and an elbow in a central vacuum pipe system. This spigot & elbow combination is handy where ....   Show More
This white 90° Sweep Spigot is designed to couple a pipe and an elbow in a central vacuum pipe system. This spigot & elbow combination is handy where there is an offset between two pipes at a corner and space is limited.

If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. One opening is male to mate with the standard "Schedule L" thin wall PVC pipe. The other opening is female to mate with an elbow, tee, etc.   Show Less
Central 90 Sweep Elbow
Ristenbatt Price: $1.75
Code: 2001-1
Mfg. Code: 765510W
This white 90° Sweep Elbow is designed to couple two pipes at a corner in a central vacuum pipe system. If a line were drawn through the center of the ....   Show More
This white 90° Sweep Elbow is designed to couple two pipes at a corner in a central vacuum pipe system. If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.   Show Less
Central Inlet Extension #765541W
Ristenbatt Price: $1.95
Code: 2014-01
Mfg. Code: 765541W
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube ....   Show More
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube on the back of the inlet so it seals properly in the mounting plate's hole.   Show Less
Hayden Inlet Mounting Plate for 2x3 #791044W
Ristenbatt Price: $3.50
Code: 1044-1
Mfg. Code: 791044W
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden ....   Show More
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.

Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.   Show Less


Close
Close

Product Search


Advanced Product Search Advanced Full-Site Search Product Features Search

Shop with Confidence




Norton Secure Seal

McAfee Secure Seal

Trustwave Trusted Commerce Seal

Categories

Types

Brands

Close panel
Close panel

User Activities

Close panel