Parts & Components

This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.

Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.   Show Less

This white 90° Sweep Elbow is designed to couple two pipes at a corner in a central vacuum pipe system. If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.   Show Less

This white Central 90° Sweep Tee is designed to couple a branch line to a main line in a central vacuum pipe system. If a line were drawn through the center of the sweep part, it would form a 90° arc with a 2.5" radius. All three female openings mate with the standard "Schedule L" thin wall PVC pipe.   Show Less

This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.

One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.   Show Less