Parts & Components

This 100' roll of 20 Guage Low Voltage Wire is typically used to connect the wall inlets to the central vacuum main power unit to control its motor. This Class 2 wire passes all building code requirements for this type of use.

When installing Hayden SuperVac systems, connect the same colored wire to the same side of the inlet valves. If the LED on the SuperHose does not mirror the color of the one on the SuperVac, simply reverse the two wires at the SuperVac unit.   Show Less

This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the transparent bag chamber, chamber lid, rubber bag seal and one Hoover "Type Y" Allergen Filtration Paper Bag. Simply remove the bagless dirt chamber and slide this assembly into the vacuum in its place. Since the bagless unit contained a HEPA filter, you may wish to replace the vacuum's foam exhaust filter with a fan-fold HEPA Exhaust Filter #43613024 for reduced dust emissions.   Show Less

This Black VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.

To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Black QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.   Show Less

This Recovery Tank Lid is for use on all earlier Hoover SteamVacs. These tanks have a lever on each side to lock it on the SteamVac. The hose adapter is manually attached to the front of the tank and removed again to use the main nozzle.   Show Less