Parts & Components
Type of Product:
Current Products
BU-2 - 25 Watt Light Bulb
This 25 Watt Light Bulb is for use in most power nozzles which have the bayonet style socket. It is 7/8" in diameter and 2 1/8" long including its metal base. ....
Show More
This 25 Watt Light Bulb is for use in most power nozzles which have the bayonet style socket. It is 7/8" in diameter and 2 1/8" long including its metal base. The 5/8" diameter base with two pins locks into the socket with a twist. The base has two rounded electrical contacts on its end.
Show Less
Paper Bag Kit for Hoover Savvy, Dual V and V2 Tech. Uprights
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the ....
Show More
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the transparent bag chamber, chamber lid, rubber bag seal and one Hoover "Type Y" Allergen Filtration Paper Bag. Simply remove the bagless dirt chamber and slide this assembly into the vacuum in its place. Since the bagless unit contained a HEPA filter, you may wish to replace the vacuum's foam exhaust filter with a fan-fold HEPA Exhaust Filter #43613024 for reduced dust emissions.
Show Less
HEPA Bag Kit for Hoover Savvy, Dual V and V2 Tech. Uprights
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the ....
Show More
This Hoover Paper Bag Kit provides a way to convert a Hoover Savvy, Dual V or V2 Technology Bagless Upright to a paper bag type vacuum. This kit includes the transparent bag chamber, chamber lid, rubber bag seal and one Hoover "Type Y" 3M Filtrete® HEPA Filter Paper Bag. Simply remove the bagless dirt chamber and slide this assembly into the vacuum in its place.
Show Less
SteamVac Recovery Tank with Lid
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. ....
Show More
This Recovery Tank with Lid is for use on all later Hoover SteamVacs. An identifier is that the tank has a large loop type handle which goes from side to side. This handle lays down against the tank lid to lock the lid on the tank. This recovery tank is for Hoover SteamVacs which have a small tank for the detergent along the side of the large clear water tank.
Show Less
SteamVac Tank Duct #38661003
This SteamVac Recovery Tank Duct fits into the front of the earlier recovery tank. It is removed to attach the hose adapter to the recovery tank. The purpose of ....
Show More
This SteamVac Recovery Tank Duct fits into the front of the earlier recovery tank. It is removed to attach the hose adapter to the recovery tank. The purpose of this part is to carry the recovered water from the top of the main nozzle up to the recovery tank lid. This duct is 4 1/2" high and tapers from 4 5/8" at the top to 4 1/2" at the bottom.
Show Less
Early SteamVac Recovery Lid #42272111
This Recovery Tank Lid is for use on all earlier Hoover SteamVacs. These tanks have a lever on each side to lock it on the SteamVac. The hose adapter is ....
Show More
This Recovery Tank Lid is for use on all earlier Hoover SteamVacs. These tanks have a lever on each side to lock it on the SteamVac. The hose adapter is manually attached to the front of the tank and removed again to use the main nozzle.
Show Less
Nilfisk Power Cord - 219522-00
This Nilfisk 30' heavy duty AGW 18/2 power cord is for use on their Allergy Vacuums. The machine end plug has two female slots to mate with the vacuum's male ....
Show More
This Nilfisk 30' heavy duty AGW 18/2 power cord is for use on their Allergy Vacuums. The machine end plug has two female slots to mate with the vacuum's male cord connector. The wall end has a male plug with two flat prongs. This is NOT a three wire grounded cord.
Show Less
Hayden Filter Retainer Disk
This filter retainer disk holds the fan-fold filter cartridge in place in most Hayden SuperVac power units. It has two tabs that lock into the filter post with ....
Show More
This filter retainer disk holds the fan-fold filter cartridge in place in most Hayden SuperVac power units. It has two tabs that lock into the filter post with a twisting motion. This retainer is 4 7/8" in diameter. The foam disk pictured with the retainer is not included with it.
Show Less
30035-00-0 - Full Filter Frame
This metal Filter Frame is made by the Shop-Vac Corporation
This metal Filter Frame is made by the Shop-Vac Corporation
Show Less
Wessell Werk Round Brush Roll with Bearings
Deluxe round Wessell Werk brush roll with large sleeve bearings. The brush roll has a slot running along its length to enable you to easily remove wrapped ....
Show More
Deluxe round Wessell Werk brush roll with large sleeve bearings. The brush roll has a slot running along its length to enable you to easily remove wrapped string and hair with a scissors. The bearing mounts are tapered to fit in the Wessel Werk EBK340 power nozzle. The roll with bearings measures 12.75" long. The pulley with cogs for the belt is at the end of the brush roll next to the bearing.
Show Less
Categories
Canisters & Power Teams
Miele Canisters
- Miele Guard Series
(Replaced C3 Series) - Miele Complete C3
Retired 2025 - Miele CX1 Blizzard
Bagless Vacuums - Miele Classic C1
(Formerly S2) - Miele Compact C1
Retired 2024 - Miele Compact C2
Retired 2021 - Miele Compact C2
Retired 2017 - Miele S2 Canisters
Retired 2015 - Miele S5 Canisters
Retired 2012 - Miele S4 Canisters
Retired 2011 - Miele S500i & S600i
Retired 2006 - Miele S300i Series
Retired 2003 - Miele S200i Series
Retired
- Miele Guard Series
- SEBO Canisters
- Sanitaire Canisters
- Titan Power Teams
- Electrolux/Precision
Retired - Sirena Canisters
- Panasonic Canisters
Retired - Eureka Canisters
Retired - Hoover Canisters
Retired
Upright Vacuums
Stick Vacuums
Central Vacuums
Bags
Filters
Belts
Light Bulbs
Hoses
Wands
Power Nozzles
Turbine Nozzles
Floor Nozzles
Dusting Brushes
Upholstery Nozzles
Crevice Tools
Special Attachments
Parts & Misc. Supplies
- Central Vac Inlets, Elbows, etc.










