The brushing action by the turbine driven revolving brush roll provides deeper cleaning of your upholstered furniture and carpeted stairs. This hand attachment is a great addition for the Miele canister above. It also works well for cleaning cars, trucks and recreational vehicles.
This genuine Miele Parquet Twister floor brush is specifically designed for cleaning Parquet floors although it will also work well on all bare floors. It is 12" wide having brush strips around its edges. Notches in the front brush strip allow dirt to easily enter the nozzle. This attachment has a long tab on its elbow to mate with the parking slots on the Miele S2, S4, S5, S6, S8, C1, C2 and C3 Series canister vacuums.
This SFS 10 Extension Hose stretches to enable you to reach 5 feet further with your Miele non-electric hose. It is used by removing your hose's curved handle, attaching the SFS 10 to your hose and then attaching the removed curved handle to the end of the extension hose. When not being used the silver hose collapses into the semi-rigid dark gray jacket and snaps closed. A short section of the silver stretch hose is visible in the photo since it is not completely closed. This extension hose is also known by part #07252210. The SFS 10 Extension Hose mates with Miele non-electric hoses which have two tabs near the curved hose handle which can be easily depressed with your thumb and finger to removal the handle. This extension hose mates perfectly with the Miele vacuum shown above.
This extra-long Genuine Miele 22" Flexible Crevice Tool #SFD 20 is designed for use on Miele hoses and wands where the attachments fit over them. The unique construction consists of a long soft vinyl center section with rigid high impact ends, making it quite durable yet flexible. This crevice tool is great for reaching under refrigerators, behind old fashioned radiators and other hard to reach areas. Purchase Miele's Radiator Brush for more efficient cleaning of radiators, etc.
This new Miele Dusting Brush with Swivel #SUB 20 is great for cleaning all hard surfaces including ledges and cabinet tops. Its long sleek design enables it to cover larger areas with a sideways sweeping motion. The tapered area with bristles is 2" wide and 6" long with 7/8" long, soft bristles. The main body is flexible vinyl so it is like having a bumper all over it to protect your furniture.
This deluxe universal dusting brush will fit on the curved hose handle and stainless steel wand which come with the vacuum shown above. Optionally, you can remove the hose handle and attach the hose directly to this dusting brush, producing a nice, more flexible configuration.
This 20" Miele Stainless Steel Wand will look and work well for years to come even in high humitity areas. The large latch release pad near its top makes it easy to remove from the hose or wand while the square hole near its bottom permits additional wands or floor nozzles to latch firmly in place. This wand works well for extending your reach of a Miele U1 or S7 upright vacuum when attached to your existing wand. This wand is slightly over 20" long, making it great as an extension wand for the Miele vacuum shown above to reach higher areas.
Easily extend the reach of your Miele attachments by 18" for those extra high ceilings, fans, etc. More than one wand can be used to extend your reach even farther. This lightweight 19" wand is constructed of high impact ABS Plastics, making it very light weight and durable. It is not made by Miele but is designed to friction fit perfectly onto the Miele hoses and wands as well as their smaller attachments.
This steel 5 3/4" long attachment adapter is not made by Miele but fits on all Miele Canister plus U1, S7 and Universal Upright hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.This adapter will not fit the Miele Powerhouse Uprights since their attachments fit inside the hose and wands. For these vacuums use the Miele Powerhouse Upright to 1 1/4" Adapter instead of this one.
This plastic 4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
Save with this special Miele Performance Pack. It contains 16 Genuine Miele Type FJM AirClean FilterBags, 4 Electrostatic Pre-motor Filters and one SF-HA 50 HEPA Filter to keep your Miele performing well with improved air flow. These bags are for use in Miele S4000, S6000, Compact C1 and Compact C2 series canisters and power teams. Include this Performance Pack when ordering the Miele compact canister shown above to add HEPA filtration and a good supply of disposable bags.
Genuine Miele 3D AirClean Bags & Filters Type FJM to keep your Miele performing well with improved air flow. The box contains 4 White AirClean FilterBags™ with Red Mounting Collar, 1 Electrostatic Pre-motor Filter and 1 Super Air Clean exhaust filter. These bags are for use in Miele S250, S300, S500, S4000, S6000 and Compact C2 series canisters and power teams. These Miele 3D AirClean 3D bags are an improved version of the former Miele bags #05588921 and #09338520.
This Genuine Miele HEPA AirClean Exhaust Filter #SF-HA50 has been proven to retain 99.99+% of dust particles. By meeting the very stringent "HEPA 13" specification, it is ideal for allergy and asthma sufferers. It only needs to be replaced approximately once a year. A special "Timestrip" provides a visual indication of when the filter should be replaced. This filter is a direct replacement for the Miele SF-AH 50 HEPA exhaust filter. This SF-HA50 filter is also known as #09616280. The Miele Compact C1 Turbo vacuum shown above can be equipped with this optional HEPA AirClean Filter for cleaner exhausted air.
This special SF-AA 50 exhaust filter combines a thick layer of Activated Charcoal and two electrostatic filters to provide heavy duty trapping of unpleasant odors. This is recommended of pet owners who desire better odor control. The filtration systems in Miele vacuums, when equipped with this exhaust filter, will provide outstanding filtration plus excellant odor control. It only needs to be replaced approximately once a year. A special "Timestrip" provides a visual indication of when the filter should be replaced. This filter is also known as #9616110. The Miele Compact C1 Turbo vacuum shown above can be equipped with this optional Active AirClean Filter for reduced odor emissions.