Hoover Vacuum Accessories

This 13.5" long "2 in 1" Grey Crevice Tool is standard on some Hoover uprights. This genuine Hoover attachment is constructed of high impact ABS Plastics, making it very light weight and durable. This crevice tool fits on all Hoover uprights which have 1 1/4" wands where the attachments fit over the hoses or wands. It also fits inside all Hoover WindTunnel hoses.

This square dusting brush has long, soft nylon bristles around its perimeter. This black 2 5/8" wide attachment is constructed of high impact ABS Plastics, making it very light weight and durable.

This generic 35mm Floor Brush will fit the Hoover Duros and Maytag canisters in their S3590 series. It is 11.75" wide and 2.5" deep, having natural hair brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle.

The wands and floor nozzles on the Hoover canisters this floor brush fits typically fit over the wand and have release buttons on them since they lock on. This nozzle simply friction fits over the wand without a locking device.

For the same nozzle to fit Hoover uprights and bagless canisters with the 1 1/4" USA size, see the Deluxe 12" Floor Brush (1 1/4"). If your attachments have pins and fit inside the wand, see the Hoover 9" Floor Brush with Pin.   View Larger Image

This floor brush to fit Hoover canisters is 9" wide and 2" deep, having a nylon brush strip through the center of the nozzle and at the ends. This is the standard floor brush packaged with most Hoover canister vacuums that use paper bags.