Hoover

Genuine Hoover Belt to keep your commercial upright performing well. This round stretch type belt should be changed at least once per year to keep your vacuum cleaning well. It works better than the standard Hoover Convertable Belt #49258AG which is used on similar vacuums.   Show Less

Genuine Hoover Belt to keep your Dial-a-matic, Concept or Concept II upright transmission driving well. This flat stretch type belt should be changed at least once per year to provide plenty of power to your transmission to drive the vacuum cleaner.   Show Less

This generic 35mm Floor Brush will fit the Hoover Duros and Maytag canisters in their S3590 series. It is 11.75" wide and 2.5" deep, having natural hair brush strips with long bristles along the front and back edges of the nozzle. Wheels on the sides between the brush strips carry the weight and downward pressure on the nozzle, allowing the bristles to glide on the floor without being flattened. Notches in the front brush strip allow dirt to easily enter the nozzle.

The wands and floor nozzles on the Hoover canisters this floor brush fits typically fit over the wand and have release buttons on them since they lock on. This nozzle simply friction fits over the wand without a locking device.

For the same nozzle to fit Hoover uprights and bagless canisters with the 1 1/4" USA size, see the Deluxe 12" Floor Brush (1 1/4"). If your attachments have pins and fit inside the wand, see the Hoover 9" Floor Brush with Pin.   Show Less

This miniature light bulb is for use in most later Hoover uprights. It is only 3/4" in diameter and about 1 1/2" long. One end is flat with wires which make contact when it is pushed straight into the light socket.   Show Less