Result pages:
123
Central Vacuum Hayden Exhaust Vent Cap #793030W
This white Hayden Exhaust Vent Cap mounts on the outside of your house where the central vacuum exhausts the air. It has a 2 1/2" square flap which blows open when the vacuum runs and closes automatically when not running. Two screw holes on 3 5/8" centers enable you to secure it to the wall.
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$6.95
Visit Store
Code: 3030-1
Mfg. Code: 793030W
Central Vacuum Exhaust Muffler #765500W
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$19.95
Visit Store
Code: 2020-14
Mfg. Code: 765500W
Central Vacuum 45 Wye #752046
This white Hayden 45° Wye is designed to couple a branch pipe into a straight main line on a 45° angle. This wye should not be confused with the
45° Double Wye #752145 which is symmetrical whereas this one is straight on one side. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$3.50
Visit Store
Code: 2046-1
Mfg. Code: 752046
Central Vac Pipe Cap #765529W
This white Central Vac Pipe Cap is designed to cap off a 2" OD central vacuum pipe which is waiting for future use. The female opening mates with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
Code: 2013-1
Mfg. Code: 765529W
Central Inlet Extension #765541W
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube on the back of the inlet so it seals properly in the mounting plate's hole.
View Larger Image
Ristenbatt Price:
$1.95
Visit Store
Code: 2014-01
Mfg. Code: 765541W
Central 90 Sweep Spigot #765511W
This white 90° Sweep Spigot is designed to couple a pipe and an elbow in a central vacuum pipe system. This spigot & elbow combination is handy where there is an offset between two pipes at a corner and space is limited.
If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. One opening is male to mate with the standard "Schedule L" thin wall PVC pipe. The other opening is female to mate with an elbow, tee, etc.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
Code: 2002-1
Mfg. Code: 765511W
Central 90 Sweep Elbow
This white 90° Sweep Elbow is designed to couple two pipes at a corner in a central vacuum pipe system. If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
Code: 2001-1
Mfg. Code: 765510W
Central 90 Short Spigot #2021-1
This white Central 90° Short Spigot is designed to be used only at the back of the
2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.
One opening is female to mate with the back of the mounting plate while the other is male to fit
inside of the standard "Schedule L" thin wall PVC pipe.
Ristenbatt Price:
$1.75
Visit Store
Code: 2021-1
Mfg. Code: 752021
Central 90 Short Elbow #765506W
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object which is able to get through this short elbow should also pass through the others easily.
If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
Code: 2004-1
Mfg. Code: 765506W
Central 45 Short Spigot #765518W
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with a
45° Double Wye #752145 where two in-line branches join with a main pipe line at a 90° angle.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
Code: 2009-1
Mfg. Code: 765518W
Result pages:
123
https://www.ristenbatt.com/xcart/Generic-Central.html