Central Vacuum Slip Pipe Coupler #765528W
Code: 765528W
Mfg. Code: 765528W
Central Vacuum Hayden Exhaust Vent Cap #793030W
Code: 3030-1
Mfg. Code: 793030W
Central Vacuum 45 Wye #752046
Code: 2046-1
Mfg. Code: 752046
Central 45 Double Wye #752145
Code: 2045-1
Mfg. Code: 752145
Central 38 Short Elbow #2038-1
Code: 2038-1
Mfg. Code: 752038
Central Vacuum Pipe Trim Collar #752031
Code: 2031-1
Mfg. Code: 752031
Central Vacuum Hayden Motor Muffler #2029-28
Code: 2029-28
Mfg. Code: 2029-28
Central 90 Short Spigot #2021-1
Code: 2021-1
Mfg. Code: 752021
Central Vacuum Exhaust Muffler #765500W
Code: 2020-14
Mfg. Code: 765500W
Central Vacuum Pipe Mounting Strap #752017
Code: 2017-1
Mfg. Code: 752017
This white Central Vacuum Slip Pipe Coupler is designed to couple two 2" OD central vacuum pipes together. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. This coupler is great for pipe repairs since it does not have a stop ridge in the center, enabling you to slide it on a pipe where separating the two pipe segments is not possible.
View Larger Image
Ristenbatt Price:
$0.95
Visit Store
This white Hayden Exhaust Vent Cap mounts on the outside of your house where the central vacuum exhausts the air. It has a 2 1/2" square flap which blows open when the vacuum runs and closes automatically when not running. Two screw holes on 3 5/8" centers enable you to secure it to the wall.
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$6.95
Visit Store
This white Hayden 45° Wye is designed to couple a branch pipe into a straight main line on a 45° angle. This wye should not be confused with the 45° Double Wye #752145 which is symmetrical whereas this one is straight on one side. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are sometimes used with this wye to couple two in-line branches with a main pipe at a 90° angle.
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white Central Vacuum Pipe Trim Collar is designed to cover the rough hole around a 2" OD central vacuum pipe. This is typically used on the floor and ceiling of a closet which has a pipe passing through it. The outside diameter of this trim collar is 3 1/2".
View Larger Image
Ristenbatt Price:
$1.50
Visit Store
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
Ristenbatt Price:
$19.95
Visit Store
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.
Ristenbatt Price:
$1.75
Visit Store
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$19.95
Visit Store
This white Central Vacuum Pipe Mounting Strap is designed to secure 2" OD central vacuum piping to the floor joists, walls, etc. It wraps around the pipe and has two flanges with screw holes for securing it.
View Larger Image
Ristenbatt Price:
$0.65
Visit Store