Central 45 Short Spigot #765518W
Code: 2009-1
Mfg. Code: 765518W
Central Vacuum Pipe Coupler #765529W
Code: 2010-1
Mfg. Code: 765529W
Central Vac Pipe Cap #765529W
Code: 2013-1
Mfg. Code: 765529W
Central Inlet Extension #765541W
Code: 2014-01
Mfg. Code: 765541W
Central Vacuum Pipe Mounting Strap #752017
Code: 2017-1
Mfg. Code: 752017
Central Vacuum Exhaust Muffler #765500W
Code: 2020-14
Mfg. Code: 765500W
Central 90 Short Spigot #2021-1
Code: 2021-1
Mfg. Code: 752021
Central Vacuum Hayden Motor Muffler #2029-28
Code: 2029-28
Mfg. Code: 2029-28
Central Vacuum Pipe Trim Collar #752031
Code: 2031-1
Mfg. Code: 752031
Central 38 Short Elbow #2038-1
Code: 2038-1
Mfg. Code: 752038
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with a 45° Double Wye #752145 where two in-line branches join with a main pipe line at a 90° angle.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. View Larger Image
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white Central Vacuum Pipe Coupler is designed to couple two 2" OD central vacuum pipes together. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$0.65
Visit Store
This white Central Vac Pipe Cap is designed to cap off a 2" OD central vacuum pipe which is waiting for future use. The female opening mates with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube on the back of the inlet so it seals properly in the mounting plate's hole.
View Larger Image
Ristenbatt Price:
$1.95
Visit Store
This white Central Vacuum Pipe Mounting Strap is designed to secure 2" OD central vacuum piping to the floor joists, walls, etc. It wraps around the pipe and has two flanges with screw holes for securing it.
View Larger Image
Ristenbatt Price:
$0.65
Visit Store
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$19.95
Visit Store
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe.
Ristenbatt Price:
$1.75
Visit Store
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
Ristenbatt Price:
$19.95
Visit Store
This white Central Vacuum Pipe Trim Collar is designed to cover the rough hole around a 2" OD central vacuum pipe. This is typically used on the floor and ceiling of a closet which has a pipe passing through it. The outside diameter of this trim collar is 3 1/2".
View Larger Image
Ristenbatt Price:
$1.50
Visit Store
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$1.75
Visit Store