Generic Central Parts & Components
Type of Product:
Retired Products
Central 45 Elbow #2008-1
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short ....
Show More
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short pipe between them to form a 90° bend in the system.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Central 45 Double Wye #752145
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are ....
Show More
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are sometimes used with this wye to couple two in-line branches with a main pipe at a 90° angle.
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. Show Less
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Central 38 Short Elbow #2038-1
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal ....
Show More
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Central 90 Sweep Tee #765501W
This white Central 90° Sweep Tee is designed to couple a branch line to a main line in a central vacuum pipe system. If a line were drawn through the ....
Show More
This white Central 90° Sweep Tee is designed to couple a branch line to a main line in a central vacuum pipe system. If a line were drawn through the center of the sweep part, it would form a 90° arc with a 2.5" radius. All three female openings mate with the standard "Schedule L" thin wall PVC pipe.
Show Less
Categories
Canisters & Power Teams
Miele Canisters
- Miele HomeCare
(In-Store Only) - Miele Complete C3
(Formerly S8) - Miele CX1 Blizzard
Bagless Vacuums - Miele Compact C1
(S4 Style Case) - Miele Classic C1
(Formerly S2) - Miele Compact C2
Retired 2021 - Miele Compact C2
Retired 2017 - Miele S2 Canisters
Retired 2015 - Miele S5 Canisters
Retired 2012 - Miele S4 Canisters
Retired 2011 - Miele S500i & S600i
Retired 2006 - Miele S300i Series
Retired 2003 - Miele S200i Series
Retired
- Miele HomeCare
- SEBO Canisters
- Sanitaire Canisters
- Titan Power Teams
- Electrolux/Precision
Retired - Sirena Canisters
- Panasonic Canisters
Retired - Eureka Canisters
Retired - Hoover Canisters
Retired
Upright Vacuums
Stick Vacuums
Central Vacuums
Bags
Filters
Belts
Light Bulbs
Hoses
Wands
Power Nozzles
Turbine Nozzles
Floor Nozzles
Dusting Brushes
Upholstery Nozzles
Crevice Tools
Special Attachments
Parts & Misc. Supplies
- Central Vac Inlets, Elbows, etc.