Generic Central Parts & Components
Type of Product:
Retired Products
Central 45 Short Spigot #765518W
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with ....
Show More
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with a 45° Double Wye #752145 where two in-line branches join with a main pipe line at a 90° angle.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. Show Less
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. Show Less
Central Vacuum Pipe Coupler #765529W
This white Central Vacuum Pipe Coupler is designed to couple two 2" OD central vacuum pipes together. Both female openings mate with the standard "Schedule L" ....
Show More
This white Central Vacuum Pipe Coupler is designed to couple two 2" OD central vacuum pipes together. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
Show Less
Central Vac Pipe Cap #765529W
This white Central Vac Pipe Cap is designed to cap off a 2" OD central vacuum pipe which is waiting for future use. The female opening mates with the standard ....
Show More
This white Central Vac Pipe Cap is designed to cap off a 2" OD central vacuum pipe which is waiting for future use. The female opening mates with the standard "Schedule L" thin wall PVC pipe.
Show Less
Central Inlet Extension #765541W
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube ....
Show More
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube on the back of the inlet so it seals properly in the mounting plate's hole.
Show Less
Central Vacuum Pipe Mounting Strap #752017
This white Central Vacuum Pipe Mounting Strap is designed to secure 2" OD central vacuum piping to the floor joists, walls, etc. It wraps around the pipe and ....
Show More
This white Central Vacuum Pipe Mounting Strap is designed to secure 2" OD central vacuum piping to the floor joists, walls, etc. It wraps around the pipe and has two flanges with screw holes for securing it.
Show Less
Central Vacuum Exhaust Muffler #765500W
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the ....
Show More
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Central 90 Short Spigot #2021-1
![]()
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a ....
Show More
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe. Show Less
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe. Show Less
Central Vacuum Hayden Motor Muffler #2029-28
![]()
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary ....
Show More
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape. Show Less
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape. Show Less
Central Vacuum Pipe Trim Collar #752031
This white Central Vacuum Pipe Trim Collar is designed to cover the rough hole around a 2" OD central vacuum pipe. This is typically used on the floor and ....
Show More
This white Central Vacuum Pipe Trim Collar is designed to cover the rough hole around a 2" OD central vacuum pipe. This is typically used on the floor and ceiling of a closet which has a pipe passing through it. The outside diameter of this trim collar is 3 1/2".
Show Less
Central 38 Short Elbow #2038-1
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal ....
Show More
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Shop with Confidence
Place to Purchase
a Vacuum Cleaner
Categories
Canisters & Power Teams
Miele Canisters
- Miele HomeCare
(In-Store Only) - Miele Complete C3
(Formerly S8) - Miele CX1 Blizzard
Bagless Vacuums - Miele Compact C1
(S4 Style Case) - Miele Classic C1
(Formerly S2) - Miele Compact C2
Retired 2021 - Miele Compact C2
Retired 2017 - Miele S2 Canisters
Retired 2015 - Miele S5 Canisters
Retired 2012 - Miele S4 Canisters
Retired 2011 - Miele S500i & S600i
Retired 2006 - Miele S300i Series
Retired 2003 - Miele S200i Series
Retired
- Miele HomeCare
- SEBO Canisters
- Sanitaire Canisters
- Titan Power Teams
- Electrolux/Precision
Retired - Sirena Canisters
- Panasonic Canisters
Retired - Eureka Canisters
Retired - Hoover Canisters
Retired
Upright Vacuums
Stick Vacuums
Central Vacuums
Bags
Filters
Belts
Light Bulbs
Hoses
Wands
Power Nozzles
Turbine Nozzles
Floor Nozzles
Dusting Brushes
Upholstery Nozzles
Crevice Tools
Special Attachments
Parts & Misc. Supplies
- Central Vac Inlets, Elbows, etc.