Generic Central
Type of Product:
Retired Products
Central 45 Double Wye #752145
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are ....
Show More
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are sometimes used with this wye to couple two in-line branches with a main pipe at a 90° angle.
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. Show Less
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Central Vacuum 45 Wye #752046
This white Hayden 45° Wye is designed to couple a branch pipe into a straight main line on a 45° angle. This wye should not be confused with the ....
Show More
This white Hayden 45° Wye is designed to couple a branch pipe into a straight main line on a 45° angle. This wye should not be confused with the 45° Double Wye #752145 which is symmetrical whereas this one is straight on one side. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe.
Show Less
Hayden Inlet Mounting Plate for 2x3 #791044W
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden ....
Show More
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. Show Less
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. Show Less
Inlet Mounting Plate for 2x4 #791041W
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 4 wall with drywall or plaster. This plate is not needed for the Hayden ....
Show More
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 4 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. Show Less
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. Show Less
Central Inlet Extension #765541W
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube ....
Show More
This Inlet Extension is designed for use with their inlet valves when mounting in walls which are thicker than they are designed to handle. It extends the tube on the back of the inlet so it seals properly in the mounting plate's hole.
Show Less
Central 38 Short Elbow #2038-1
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal ....
Show More
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Central 45 Elbow #2008-1
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short ....
Show More
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short pipe between them to form a 90° bend in the system.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. Show Less
Central 45 Short Spigot #765518W
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with ....
Show More
This white Central 45° Short Spogot is designed to couple a pipe and an elbow or wye together where that angle is needed. Two of these are often used with a 45° Double Wye #752145 where two in-line branches join with a main pipe line at a 90° angle.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. Show Less
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. One opening is female to mate with the standard "Schedule L" thin wall PVC pipe while the other is male to mate with an elbow, tee, wye, etc. Show Less
Central 90 Short Elbow #765506W
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object ....
Show More
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object which is able to get through this short elbow should also pass through the others easily.
If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate. Show Less
If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate. Show Less
Central 90 Short Spigot #2021-1
![]()
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a ....
Show More
This white Central 90° Short Spigot is designed to be used only at the back of the 2x3 Inlet Mounting Plates #791044W due to the very limited space in a 2x3 wall.
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe. Show Less
One opening is female to mate with the back of the mounting plate while the other is male to fit inside of the standard "Schedule L" thin wall PVC pipe. Show Less
Shop with Confidence
Place to Purchase
a Vacuum Cleaner
Categories
Canisters & Power Teams
Miele Canisters
- Miele HomeCare
(In-Store Only) - Miele Complete C3
(Formerly S8) - Miele CX1 Blizzard
Bagless Vacuums - Miele Compact C1
(S4 Style Case) - Miele Classic C1
(Formerly S2) - Miele Compact C2
Retired 2021 - Miele Compact C2
Retired 2017 - Miele S2 Canisters
Retired 2015 - Miele S5 Canisters
Retired 2012 - Miele S4 Canisters
Retired 2011 - Miele S500i & S600i
Retired 2006 - Miele S300i Series
Retired 2003 - Miele S200i Series
Retired
- Miele HomeCare
- SEBO Canisters
- Sanitaire Canisters
- Titan Power Teams
- Electrolux/Precision
Retired - Sirena Canisters
- Panasonic Canisters
Retired - Eureka Canisters
Retired - Hoover Canisters
Retired
Upright Vacuums
Stick Vacuums
Central Vacuums
Bags
Filters
Belts
Light Bulbs
Hoses
Wands
Power Nozzles
Turbine Nozzles
Floor Nozzles
Dusting Brushes
Upholstery Nozzles
Crevice Tools
Special Attachments
Parts & Misc. Supplies
- Central Vac Inlets, Elbows, etc.