Hayden Cartridge Filter #818744WSH
Code: 818744WSH
Central Vacuum Slip Pipe Coupler #765528W
Code: 765528W
Mfg. Code: 765528W
30' Quilted Hose Sock for Central Vacuum Hose
Code: 7650961135
Hayden Cog Power Nozzle Belt #4193-00
Code: 4193-00
Central Vacuum Hayden Exhaust Vent Cap #793030W
Code: 3030-1
Mfg. Code: 793030W
Central Vacuum 45 Wye #752046
Code: 2046-1
Mfg. Code: 752046
Central 45 Double Wye #752145
Code: 2045-1
Mfg. Code: 752145
Central 38 Short Elbow #2038-1
Code: 2038-1
Mfg. Code: 752038
Central Vacuum Pipe Trim Collar #752031
Code: 2031-1
Mfg. Code: 752031
Central Vacuum Hayden Motor Muffler #2029-28
Code: 2029-28
Mfg. Code: 2029-28
This large area filter cartridge is designed to provide good filtration while enabling high rates of air flow on the Hayden SuperVac power units. The fanfold design provides an extra large filter surface so resistance to air flow is minimized.
View Larger Image
Ristenbatt Price:
$74.95
Visit Store
This white Central Vacuum Slip Pipe Coupler is designed to couple two 2" OD central vacuum pipes together. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. This coupler is great for pipe repairs since it does not have a stop ridge in the center, enabling you to slide it on a pipe where separating the two pipe segments is not possible.
View Larger Image
Ristenbatt Price:
$0.95
Visit Store
This thick, grey quilted hose sock provides a soft, gentle surface for your central vacuum hose to protect your furniture and walls. A full length zipper makes it easy to install on your hose. This is made to fit all 30' central vacuum hoses. Color and pattern may vary from the one shown here.
Ristenbatt Price:
$54.95
Visit Store
This reinforced belt fits the Hayden power nozzles that use a cog type belt. This design provides positive power transfer from the motor to the brush roll. It can not stretch and slip. We sell this belt individually since they typically will last three to five or more years.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This white Hayden Exhaust Vent Cap mounts on the outside of your house where the central vacuum exhausts the air. It has a 2 1/2" square flap which blows open when the vacuum runs and closes automatically when not running. Two screw holes on 3 5/8" centers enable you to secure it to the wall.
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$6.95
Visit Store
This white Hayden 45° Wye is designed to couple a branch pipe into a straight main line on a 45° angle. This wye should not be confused with the 45° Double Wye #752145 which is symmetrical whereas this one is straight on one side. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This white Central Vac 45° Double Wye is designed to couple two branch pipes on a 45° angle into a main line. Two 45° Spigots #765518W are sometimes used with this wye to couple two in-line branches with a main pipe at a 90° angle.
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
This wye should not be confused with the 45° Wye #752046 which is not symmetrical like this one is. All three openings are female to mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This white Central 38° Short Elbow is designed to provide the correct angle for running a central vacuum pipe under a flight of stairs with a horizontal pipe located at the top and bottom.
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
If a line were drawn through the center of the curve, it would form a 38° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white Central Vacuum Pipe Trim Collar is designed to cover the rough hole around a 2" OD central vacuum pipe. This is typically used on the floor and ceiling of a closet which has a pipe passing through it. The outside diameter of this trim collar is 3 1/2".
View Larger Image
Ristenbatt Price:
$1.50
Visit Store
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
Ristenbatt Price:
$19.95
Visit Store