Inlet Mounting Plate for 2x4 #791041W
Code: 1041-1
    Mfg. Code: 791041W
Hayden Inlet Mounting Plate for 2x3 #791044W
Code: 1044-1
    Mfg. Code: 791044W
White Standard Inlet #791700W
Code: 1700-1
    Mfg. Code: 791700W
Ivory Standard Inlet #791700
Code: 1700-3
    Mfg. Code: 791700
Hayden White SuperValve w/Plate #791790W
Code: 1750-1
    Mfg. Code: 791790W
Central 90 Sweep Elbow
Code: 2001-1
    Mfg. Code: 765510W
Central 90 Sweep Spigot #765511W
Code: 2002-1
    Mfg. Code: 765511W
Central 90 Sweep Tee #765501W
Code: 2003-1
    Mfg. Code: 765501W
Central 90 Short Elbow #765506W
Code: 2004-1
    Mfg. Code: 765506W
Central 45 Elbow #2008-1
Code: 2008-1
    Mfg. Code: SV8056
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 4 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbows #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This Inlet Mounting Plate is designed for mounting their standard inlet in a 2 x 3 wall with drywall or plaster. This plate is not needed for the Hayden SuperValve since their unique mounting plate is packaged with the inlet.
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Due to the limited space, a special Short 90° Spigot #765506W is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This White Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This Ivory Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This White SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$24.95
Visit Store
This white 90° Sweep Elbow is designed to couple two pipes at a corner in a central vacuum pipe system. If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white 90° Sweep Spigot is designed to couple a pipe and an elbow in a central vacuum pipe system. This spigot & elbow combination is handy where there is an offset between two pipes at a corner and space is limited.
If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. One opening is male to mate with the standard "Schedule L" thin wall PVC pipe. The other opening is female to mate with an elbow, tee, etc. View Larger Image
If a line were drawn through the center of the curve, it would form a 90° arc with a 2.5" radius. One opening is male to mate with the standard "Schedule L" thin wall PVC pipe. The other opening is female to mate with an elbow, tee, etc. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white Central 90° Sweep Tee is designed to couple a branch line to a main line in a central vacuum pipe system. If a line were drawn through the center of the sweep part, it would form a 90° arc with a 2.5" radius. All three female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$3.50
Visit Store
This white 90° Short Elbow is designed to be used at the back of their wall inlets. All other elbows, tees, etc. should be the sweep type so any object which is able to get through this short elbow should also pass through the others easily.
If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate. View Larger Image
If a line were drawn through the center of the curve, it would form a 90° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe as well as the back of the inlet mounting plate. View Larger Image
Ristenbatt Price:
$1.75
Visit Store
This white 45° Elbow is designed to couple two central vacuum pipes together where that angle is needed. Two can also be used at a corner with a short pipe between them to form a 90° bend in the system.
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
If a line were drawn through the center of the curve, it would form a 45° arc with a 1" radius. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$1.75
Visit Store