Hayden Cartridge Filter #818744WSH
Code: 818744WSH
30' Quilted Hose Sock for Central Vacuum Hose
Code: 7650961135
Hayden White SuperValve w/Plate #791790W
Code: 1750-1
Mfg. Code: 791790W
Central Vacuum Exhaust Muffler #765500W
Code: 2020-14
Mfg. Code: 765500W
Central Vacuum Hayden Motor Muffler #2029-28
Code: 2029-28
Mfg. Code: 2029-28
Hayden Cog Power Nozzle Belt #4193-00
Code: 4193-00
Ivory Standard Inlet #791700
Code: 1700-3
Mfg. Code: 791700
White Standard Inlet #791700W
Code: 1700-1
Mfg. Code: 791700W
Central Vacuum Hayden Exhaust Vent Cap #793030W
Code: 3030-1
Mfg. Code: 793030W
Central 90 Sweep Tee #765501W
Code: 2003-1
Mfg. Code: 765501W
This large area filter cartridge is designed to provide good filtration while enabling high rates of air flow on the Hayden SuperVac power units. The fanfold design provides an extra large filter surface so resistance to air flow is minimized.
View Larger Image
Ristenbatt Price:
$74.95
Visit Store
This thick, grey quilted hose sock provides a soft, gentle surface for your central vacuum hose to protect your furniture and walls. A full length zipper makes it easy to install on your hose. This is made to fit all 30' central vacuum hoses. Color and pattern may vary from the one shown here.
Ristenbatt Price:
$54.95
Visit Store
This White SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily. View Larger Image
Ristenbatt Price:
$24.95
Visit Store
This white Hayden Exhaust Muffler mounts in the exhaust pipe leading from a central vacuum. It is not necessary for most installations but may be desired if the exhaust is near a living area, deck or patio.
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
This muffler is 13 1/4" long and 3 3/8" in diameter. Both female openings mate with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$19.95
Visit Store
This white Central Vacuum Motor Muffler mounts on top of a Hayden SuperVac unit to reduce the noise emitted by the top of the motor. It often is not necessary for basement or garage mounted units but may be desired if it is mounted closer to the living areas.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
This muffler is 5 1/8" high and 4 3/4" in diameter with a flnge measuring 5 3/4" in diameter. It can be secured either with screws or with the supplied double sided foam tape.
Ristenbatt Price:
$19.95
Visit Store
This reinforced belt fits the Hayden power nozzles that use a cog type belt. This design provides positive power transfer from the motor to the brush roll. It can not stretch and slip. We sell this belt individually since they typically will last three to five or more years.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This Ivory Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This White Wall Inlet is designed to be used with the Inlet Mounting Plate #791041W when mounting in a 2 x 4 wall with drywall or plaster. A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
Ristenbatt Price:
$9.95
Visit Store
This white Hayden Exhaust Vent Cap mounts on the outside of your house where the central vacuum exhausts the air. It has a 2 1/2" square flap which blows open when the vacuum runs and closes automatically when not running. Two screw holes on 3 5/8" centers enable you to secure it to the wall.
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
The dimentions of the faceplate are 3 5/8" wide and 4 5/8" high. If has a female opening on its back which mates with the standard "Schedule L" thin wall PVC pipe. View Larger Image
Ristenbatt Price:
$6.95
Visit Store
This white Central 90° Sweep Tee is designed to couple a branch line to a main line in a central vacuum pipe system. If a line were drawn through the center of the sweep part, it would form a 90° arc with a 2.5" radius. All three female openings mate with the standard "Schedule L" thin wall PVC pipe.
View Larger Image
Ristenbatt Price:
$3.50
Visit Store