This page is from Our Product Information Archive
The products listed on this page have been discontinued by their manufacturer. We are providing this archived page for your information only.

Generic Central

Generic Central

Availability:

1/4 Pint PVC Cement #107100051
This 1/4 Pint of PVC comes with a lid mounted swab for applying it to the pipe when installing a central vacuum system. It is generally recommended to be applied to the pipe but not the elbow, coupler, etc. to prevent any beading on the inside which could catch dirt and fuzz. Twisting the pipe as it is inserted aids in the assembly and spreads the cement more evenly.
Archived Retired Product - Not Available for Sale


20 Guage Low Voltage Wire #20GA2-100
This 100' roll of 20 Guage Low Voltage Wire is typically used to connect the wall inlets to the central vacuum main power unit to control its motor. This Class 2 wire passes all building code requirements for this type of use.

When installing Hayden SuperVac systems, connect the same colored wire to the same side of the inlet valves. If the LED on the SuperHose does not mirror the color of the one on the SuperVac, simply reverse the two wires at the SuperVac unit.
Archived Retired Product - Not Available for Sale


Black QuickTrim Kit #QT BL
If mounting a Black VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This Black QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale


Black VacPan Kit #VP BL
This Black VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.

To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Black QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale


Hayden "Where There's A Wall There's a Way" Booklet
This Hayden "How To" Guide titled "Where There's A Wall There's a Way" will assist you in the planning and installation of your central vacuum and the Hayden SuperSystem. Written by Ted Hayden, Chairman and CEO of Hayden Industries Inc., this eighteen page booklet includes drawings and helpful tips for installing central vacuums in new or existing homes using either Hayden's standard wall inlets or their SuperValves.   View Larger Image
Archived Retired Product - Not Available for Sale


Hayden 90 Short Tee #2033-1
This white Hayden 90° Short Tee is designed for mounting two standard inlet valves exactly opposite each other in the same 2 x 4 wall. SuperValves can not be mounted this way due to their electrical boxes. All three female openings mate with the standard "Schedule L" thin wall PVC pipe and inlet mounting plates.
Archived Retired Product - Not Available for Sale


Ivory QuickTrim Kit #QT IV
If mounting an Ivory VacPan in an existing structure, you may need to make the opening larger than what the face plate will cover. This Ivory QuickTrim Kit is designed to add the finishing touch to the installation by covering the larger opening. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.
Archived Retired Product - Not Available for Sale


Hayden Ivory Standard 1-Inlet Kit #3117-3
Kit containing one Ivory Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory Standard Inlet #1700-3, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.
Archived Retired Product - Not Available for Sale


Hayden Ivory Standard 3-Inlet Kit #3317-3
Kit containing three Ivory Hayden Standard Inlets and all the elbows, etc. needed for a typical three inlet installation. Included are 3 Ivory Standard Inlets #1700-3, 3 Inlet Mounting Plates #1041-1, 3 Short 90° Elbows #2004-1, 9 Sweep 90° Elbows #2001-1, 6 45° Elbows #2008-1, 2 90° Sweep Tees #2003-1, 6 Pipe Couplers #2010-1, 6 Pipe Mounting Straps #2017-1, 1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.   View Larger Image
Archived Retired Product - Not Available for Sale


Hayden Ivory SuperValve 1-Inlet Kit #3175-3
Kit containing one Ivory Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory SuperValve w/Mounting Plate #1750-3, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.
Archived Retired Product - Not Available for Sale



Ristenbatt Vacuum
Accepts Credit Cards


McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Honored Member of the Vacuum Dealers Trade Association
VDTA Member