This page is from Our Product Information Archive
The products listed on this page have been discontinued by their manufacturer. We are providing this archived page for your information only.

Generic Central


Type of Product:
Current Products
Hayden White SuperValve 3-Inlet Kit #3375-1
Archived Retired Product
Not Available for Sale
Code: 3375-1
Mfg. Code: 793375W
Kit containing three White Hayden SuperValves and all the elbows, etc. needed for a typical three inlet installation. Included are 3 White SuperValves ....   Show More
Kit containing three White Hayden SuperValves and all the elbows, etc. needed for a typical three inlet installation. Included are 3 White SuperValves w/Mounting Plates #791760W, 3 Short 90° Elbows #752004, 9 Sweep 90° Elbows #752001, 6 45° Elbows #752008, 2 90° Sweep Tees #752003, 6 Pipe Couplers #752010, 6 Pipe Mounting Straps #752017, 1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.   Show Less
Hayden White Standard 3-Inlet Kit #3317-1
Archived Retired Product
Not Available for Sale
Code: 3317-1
Mfg. Code: 793317W
Kit containing three White Hayden Standard Inlets and all the elbows, etc. needed for a typical three inlet installation. Included are 3 White Regular Valves ....   Show More
Kit containing three White Hayden Standard Inlets and all the elbows, etc. needed for a typical three inlet installation. Included are 3 White Regular Valves w/Mounting Plates #791700W, 3 Mounting Plates #791041W, 3 Short 90° Elbows #752004, 9 Sweep 90° Elbows #752001, 6 45° Elbows #752008, 2 90° Sweep Tees #752003, 6 Pipe Couplers #752010, 6 Pipe Mounting Straps #752017, 1/4 pint PVC cement, 15 cable ties and 80' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.   Show Less
Hayden Cartridge Filter #8744-00-WSH
Archived Retired Product
Not Available for Sale
Code: 8744-00-WSH
This large area filter cartridge is designed to provide good filtration while enabling high rates of air flow on the Hayden SuperVac power units. The fanfold ....   Show More
This large area filter cartridge is designed to provide good filtration while enabling high rates of air flow on the Hayden SuperVac power units. The fanfold design provides an extra large filter surface so resistance to air flow is minimized.   Show Less
Black VacPan Kit #VP BL
Archived Retired Product
Not Available for Sale
Code: VP BL
This Black VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum ....   Show More
This Black VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.

To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Black QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.   Show Less
Hayden Ivory SuperValve 1-Inlet Kit #3175-3
Archived Retired Product
Not Available for Sale
Code: 3175-3
Mfg. Code: 3175-3
Kit containing one Ivory Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory SuperValve w/Mounting ....   Show More
Kit containing one Ivory Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory SuperValve w/Mounting Plate #1750-3, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.   Show Less
Ivory VacPan Kit #VP IV
Archived Retired Product
Not Available for Sale
Code: VP IV
This Ivory VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum ....   Show More
This Ivory VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.

To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The Ivory QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.   Show Less
Hayden White SuperValve 1-Inlet Kit #3175-1
Archived Retired Product
Not Available for Sale
Code: 3175-1
Mfg. Code: 3175-1
Kit containing one White Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White SuperValve w/Mounting ....   Show More
Kit containing one White Hayden SuperValves and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White SuperValve w/Mounting Plate #1750-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Piping nor electrical cable needed to connect the inlets to a 120 volt source.   Show Less
White VacPan Kit #VP WH
Archived Retired Product
Not Available for Sale
Code: VP WH
This White VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum ....   Show More
This White VacPan mounts in the recessed area at the base of your kitchen cabinets or in baseboards to provide the ultimate in convenience for a central vacuum system. Simply brush your dry spill over to the VacPan, activate it with your foot and your powerful central vac wisks the debris away.

To attach to a pipe coming up through the floor, you will also need one Short 90° Elbow #2004-1, one Sweep 90° Elbow #2001-1 and a short section of pipe. If mounting in an existing structure, you may need to make the opening larger than what the face plate will cover. The White QuickTrim Kit is designed to add the finishing touch to the installation. The VacPan and QuickTrim are made in Canada but not by Hayden. They are designed for any central vacuum system which uses 2" pipes.   Show Less
Hayden Ivory Standard 1-Inlet Kit #3117-3
Archived Retired Product
Not Available for Sale
Code: 3117-3
Mfg. Code: 3117-3
Kit containing one Ivory Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory Standard Inlet ....   Show More
Kit containing one Ivory Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 Ivory Standard Inlet #1700-3, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.   Show Less
Hayden White Standard 1-Inlet Kit #3117-1
Archived Retired Product
Not Available for Sale
Code: 3117-1
Mfg. Code: 3117-1
Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White Standard Inlet ....   Show More
Kit containing one White Hayden Standard Inlet and all the elbows, etc. needed for a typical one inlet installation. Included are 1 White Standard Inlet #1700-1, 1 Inlet Mounting Plate #1041-1, 1 Short 90° Elbow #2004-1, 3 Sweep 90° Elbows #2001-1, 2 45° Elbows #2008-1, 1 90° Sweep Tee #2003-1, 3 Pipe Couplers #2010-1, 2 Pipe Mounting Straps #2017-1, 1.4 oz. PVC cement, 5 cable ties and 25' of 18/2 Low Voltage Wire. This kit does not include thin wall 2" PVP Pipe.   Show Less


Close
Close

Product Search


Advanced Product Search Advanced Full-Site Search Product Features Search

Shop with Confidence




Norton Secure Seal

McAfee Secure Seal

Trustwave Trusted Commerce Seal

Categories

Types

Brands

Close panel
Close panel

User Activities

Close panel