This 1/4 Pint of PVC comes with a lid mounted swab for applying it to the pipe when installing a central vacuum system. It is generally recommended to be applied to the pipe but not the elbow, coupler, etc. to prevent any beading on the inside which could catch dirt and fuzz. Twisting the pipe as it is inserted aids in the assembly and spreads the cement more evenly.
This Ivory Hayden SuperValve includes the special mounting plate with integrated electrical box. It is designed to be mounted in a 2 x 4 wall with drywall or plaster. The inlet has a 110 volt receptical which mates with the Hayden dual voltage SuperHose to provide current for the power nozzle.
A Short 90° Elbow #752004 is typically used directly behind the mounting plate. All other elbows, tees, etc. should be the sweep type so any object which is able to get through the short elbow should also pass through the others easily.
View Larger Image
This white Hayden 90° Short Tee is designed for mounting two standard inlet valves exactly opposite each other in the same 2 x 4 wall. SuperValves can not be mounted this way due to their electrical boxes. All three female openings mate with the standard "Schedule L" thin wall PVC pipe and inlet mounting plates.
This 100' roll of 20 Guage Low Voltage Wire is typically used to connect the wall inlets to the central vacuum main power unit to control its motor. This Class 2 wire passes all building code requirements for this type of use.
When installing Hayden SuperVac systems, connect the same colored wire to the same side of the inlet valves. If the LED on the SuperHose does not mirror the color of the one on the SuperVac, simply reverse the two wires at the SuperVac unit.