The Miele C2 Limited Edition w/STB 205-3 described on this page has been discontinued by its
manufacturer. We are providing this archived page for your information only.
For current products, please see our List of Miele Canisters & Power Teams.
Miele C2 Limited Edition Vacuum with STB 205-3 Turbobrush
The brushing action by the turbine driven revolving brush roll provides deeper cleaning of your upholstered furniture and carpeted stairs. This hand attachment is a great addition for the Miele canister above. It also works well for cleaning cars, trucks and recreational vehicles.
This SFS 10 Extension Hose stretches to enable you to reach 5 feet further with your Miele non-electric hose. It is used by removing your hose's curved handle, attaching the SFS 10 to your hose and then attaching the removed curved handle to the end of the extension hose. When not being used the silver hose collapses into the semi-rigid dark gray jacket and snaps closed. A short section of the silver stretch hose is visible in the photo since it is not completely closed. This extension hose is also known by part #07252210.
The SFS 10 Extension Hose mates with Miele non-electric hoses which have two tabs near the curved hose handle which can be easily depressed with your thumb and finger to removal the handle. This extension hose mates perfectly with the Miele vacuum shown above.
This set of four attachments is especially designed for cleaning delicate items and collectibles throughout your house. Based around the Micro Hose with its combination crevice tool/dusting brush, this set extends its use by including an Extension Crevice Tool, Extension Dusting Brush and Angled Crevice Nozzle.
This new Miele Dusting Brush with Swivel #SUB 20 is great for cleaning all hard surfaces including ledges and cabinet tops. Its long sleek design enables it to cover larger areas with a sideways sweeping motion. The tapered area with bristles is 2" wide and 6" long with 7/8" long, soft bristles. The main body is flexible vinyl so it is like having a bumper all over it to protect your furniture.
This deluxe universal dusting brush will fit on the curved hose handle and stainless steel wand which come with the vacuum shown above. Optionally, you can remove the hose handle and attach the hose directly to this dusting brush, producing a nice, more flexible configuration.
This extra-long Genuine Miele 22" Flexible Crevice Tool #SFD 20 is designed for use on Miele hoses and wands where the attachments fit over them. The unique construction consists of a long soft vinyl center section with rigid high impact ends, making it quite durable yet flexible. This crevice tool is great for reaching under refrigerators, behind old fashioned radiators and other hard to reach areas.
This 20" Miele Stainless Steel Wand will look and work well for years to come even in high humitity areas. The large latch release pad near its top makes it easy to remove from the hose or wand while the square hole near its bottom permits additional wands or floor nozzles to latch firmly in place. This wand works well for extending your reach of a Miele U1 or S7 upright vacuum when attached to your existing wand. This wand is slightly over 20" long, making it great as an extension wand for the Miele vacuum shown above to reach higher areas.
This steel 5 3/4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
This Miele Hose Inlet Hygiene Cap can be snapped into the hose inlets on most Miele canisters after the hose is removed. This added protection enhances the ability of the Miele vacuums in these series to provide extremely low dust emissions. A clip is incorporated into this special cap to enable it to be clipped to the hose when removed from the hose inlet. View the larger image to see how it fits into the hose inlet.
This plastic 4" long attachment adapter fits on European 35mm size hoses and wands to enable the use of standard USA 1 1/4" attachments. These include attachments on Shop-Vac, Eureka, many Electrolux models and some Hoover uprights plus various other USA brands. You will find a number of attachments for use with this adapter described on our Attachments to fit American Standard Size Vacuums page.
Genuine Miele 3D AirClean Bags & Filters Type GN to keep your Miele performing well with improved air flow. The box contains 4 White AirClean FilterBags with Blue Mounting Collar, 1 Electrostatic Pre-motor Filter and 1 Super Air Clean exhaust filter. The bags are for use in Miele S400, S600, S2000, S5000, S8000, C1 and C3 series canisters and power teams. These Miele 3D AirClean bags are an improved version of the former Miele bags #05588941 and #09338530. Include additional dustbags when ordering the Miele midsize canister shown above and receive free shipping on them as well.
This Genuine Miele HEPA AirClean Exhaust Filter #SF-HA50 has been proven to retain 99.99+% of dust particles. By meeting the very stringent "HEPA 13" specification, it is ideal for allergy and asthma sufferers. It only needs to be replaced approximately once a year. A special "Timestrip" provides a visual indication of when the filter should be replaced. This filter is a direct replacement for the Miele SF-AH 50 HEPA exhaust filter. This SF-HA50 filter is also known as #09616280.
Add this HEPA filter for even cleaner exhausted air. The completely sealed system of the vacuum shown above, when used with this optional HEPA Filter, will retain 99.97% of pollens, household dust, dust mite droppings and other allergens as small as 0.3 µm in size. This is highly recommended for those who have dust related allergies or asthma.